Abstract:The methanol-to-olefin (MTO) process is important because it offers an alternative to the conventional oil route for the conversion of natural gas or coal to light olefins. The most promising catalysts for the MTO reaction are solid acids with a zeolite structure, where reactants and products such as ethylene and propylene may freely diffuse through active catalysts, but products with larger kinetic diameters are trapped within the cages. In this work, SAPO-34 molecular sieves were synthesized by hydrothermal crystallization, using triethylamine (TEA) as the template. These samples were characterized by X-ray diffraction, scanning electron microscopy, thermo-gravimetric analysis-differential scanning calorimetry, energy dispersive spectroscopy, Fourier transform-infrared (FT-IR) and N(2) adsorption-desorption. The effects of template concentration and crystallization time on the physicochemical properties and catalytic performance were investigated. The crystallinity and morphology of SAPO-34 were influenced by the concentration of the template. Pure SAPO-34 was obtained when the TEA/Al(2)O(3) molar ratio was higher than 2.0. With increased crystallization time, the Si content in SAPO-34 crystals increased, which influenced the surface acidity. FT-IR spectra indicated that all samples were dominated by Lewis acid sites and the sample crystallized for 11 h exhibited the lowest number of Lewis acid sites. The catalytic performance of SAPO-34 was tested with the MTO reaction. High selectivity to olefins (C(2)H(4) + C(3)H(6)) was obtained over the catalyst synthesized with a TEA/Al(2)O(3) ratio of 3.0 and crystallization time of 11 h. At the reaction temperature of 450 degrees C, the methanol conversion approached 100% and the yield of C(2)-C(4) olefins was more than 80%. Hence, SAPO-34 molecular sieves were shown to be excellent catalysts for the MTO reaction. (C) 2010 Curtin University of Technology and John Wiley & Sons, Ltd.

Simulation of multi-fluidized-bed in series for methanol to olefins

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Multi-Scale Coupling Model Involving Bed and Catalyst Particle for MTP Reactor Simulation

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Multiphase catalytic reactors for methanol to olefins

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Methanol to Propylene over Foam SiC-Supported ZSM-5 Catalyst: Performance of Multiple Reaction–Regeneration Cycles

Enhanced Reaction Performances For Light Olefin Production From Butene Through Cofeeding Reaction With Methanol

Numerical simulation of commercial MTO fluidized bed reactor with a coarse-grained discrete particle method — EMMS–DPM

Recent Progress in Methanol‐to‐Olefins (MTO) Catalysts

A design kinetic and hydrodynamic study of a coupled dual fluidized bed MTO reactor-regenerator system

A Multi-Stage Fluidized Bed Strategy for the Enhanced Conversion of Methanol into Aromatics

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Multi-scale simulation of the strongly exothermic process of Fischer–Tropsch synthesis to lower olefins

Investigating the mixing sequence and the Si content in SAPO-34 synthesis for selective conversion of methanol to light olefins using morpholine &/ TEAOH templates

Synthesis, characterization and catalytic performance of SAPO-34 molecular sieves for methanol-to-olefin (MTO) reaction

Stabilizing the framework of SAPO-34 zeolite toward long-term methanol-to-olefins conversion

Numerical Simulation of CO Methanation for the Production of Synthetic Natural Gas in a Fluidized Bed Reactor