Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Numerical simulation of commercial MTO fluidized bed reactor with a coarse-grained discrete particle method — EMMS–DPM

Simulation of multi-fluidized-bed in series for methanol to olefins

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Multi-Scale Coupling Model Involving Bed and Catalyst Particle for MTP Reactor Simulation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Numerical investigation of the oxy-fuel combustion in the fluidized bed using macroscopic model supported by CFD-DDPM

Gas–solid reactor optimization based on EMMS-DPM simulation and machine learning

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Numerical Simulation of CO Methanation for the Production of Synthetic Natural Gas in a Fluidized Bed Reactor

Trans-level multi-scale simulation of porous catalytic systems: Bridging reaction kinetics and reactor performance

Modeling of Oxidative Coupling of Methane for Manufacture of Olefins—Part I: CFD Simulations

Optimization of methane catalytic decomposition in a fluidized bed reactor: A computational approach

A design kinetic and hydrodynamic study of a coupled dual fluidized bed MTO reactor-regenerator system

Three-Dimensional Computation Fluid Dynamics Simulation of CO Methanation Reactor with Immersed Tubes

Porous-media model based particle-resolved simulation of a fixed bed with olefin catalytic cracking reaction