Abstract:The conceptual design and engineering of an integrated catalytic reactor requires a thorough understanding of the prevailing mechanisms and phenomena to ensure a safe operation while achieving desirable efficiency and product yields. The necessity and importance of these requirements are demonstrated in this investigation in the case of novel membrane-assisted reactors tailored for CO2 hydrogenation. Firstly, a carbon molecular sieve membrane was developed for simultaneous separation of CO2 from a hot post-combustion CO2-rich stream, followed by directing it along a packed-bed of hybrid CuO-ZnO/ZSM5 catalysts to react with hydrogen and produce DiMethyl Ether (DME). The generated water is removed from the catalytic bed by permeation through the membrane which enables reaction equilibrium shift towards more CO2-conversion. Extra process intensification was achieved using a membrane-assisted reactive distillation reactor, where similarly several such parallel membranes were erected inside a catalytic bed to form a reactive-distillation column. This provides the opportunity for a synchronized separation of CO2 and water by a membrane, mixing the educts (i.e., hydrogen and CO2) and controlling the reaction along the catalytic bed while distilling the products (i.e., methanol, water and DME) through the catalyst loaded column. The hybrid catalyst and carbon molecular sieve membrane were developed using the synthesis methods and proved experimentally to be among the most efficient compared to the state-of-the-art. In this context, selective permeation of the membrane and selective catalytic conversion of hybrid catalysts under the targeted operating temperature range of 200–260 °C and 10–20 bar pressure were studied. For the membrane, the obtained high flux of selective CO2-permeation was beyond the Robeson upper bound. Moreover, in the hybrid catalytic structure, a combined methanol and DME yield of 15% was secured. Detailed results of catalyst and membrane synthesis and characterization along with catalyst test and membrane permeation tests are reported in this paper. The performance of various configurations of integrated catalytic and separation systems was studied through an experimentally supported simulation along with the systematic analysis of the conceptual design and operation of such reactive distillation. Focusing on the subnano-/micro-meter scale, the performance of sequential reactions while considering the interaction of the involved catalytic materials on the overall performance of the hybrid catalyst structure was studied. On the same scale, the mechanism of separation through membrane pores was analyzed. Moreover, looking at the micro-/milli-meter scale in the vicinity of the catalyst and membrane, the impacts of equilibrium shift and the in-situ separation of CO2 and steam were analyzed, respectively. Finally, at the macro-scale separation of components, the impacts of established temperature, pressure and concentration profiles along the reactive distillation column were analyzed. The desired characteristics of the integrated membrane reactor at different scales could be identified in this manner.

A design kinetic and hydrodynamic study of a coupled dual fluidized bed MTO reactor-regenerator system

Simulation of multi-fluidized-bed in series for methanol to olefins

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Kinetic and Regenerator Modeling of the Coke Combustion in the Moving Bed MTP Process

Development and application of energy-saving process for methanol to olefins

Multiscale Analysis of Membrane-Assisted Integrated Reactors for CO2 Hydrogenation to Dimethyl Ether

Multiphase catalytic reactors for methanol to olefins

Collaborative removal of fine catalysts particles and insoluble organics from methanol-to-olefins reaction wastewater using horizontal swirl regeneration micro-channel separation (HSRMS)

Design of a novel tubular membrane reactor with a middle annular injector for enhancement of dry reforming towards high hydrogen purity: CFD analysis

Modeling, optimization and operability analysis of Lurgi and Haldor Topsøe methanol synthesis reactors

Experimental and kinetic modelling studies for the design of fixed bed methanol reactor over CuZA catalyst

Numerical simulation of commercial MTO fluidized bed reactor with a coarse-grained discrete particle method — EMMS–DPM

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Hydrodynamics and OCM reaction performance in a bubbling fluidized bed reactor and a riser reactor

A System for the Combined Carbon Capture and Utilization to Produce Renewable Methanol from Biogas

Multi-Objective Optimization and Multi-Criteria Decision-Making Approach to Design Multi-Tubular Packed-Bed Membrane Reactor in Oxidative Dehydrogenation of Ethane

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane