Abstract:The conceptual design and engineering of an integrated catalytic reactor requires a thorough understanding of the prevailing mechanisms and phenomena to ensure a safe operation while achieving desirable efficiency and product yields. The necessity and importance of these requirements are demonstrated in this investigation in the case of novel membrane-assisted reactors tailored for CO2 hydrogenation. Firstly, a carbon molecular sieve membrane was developed for simultaneous separation of CO2 from a hot post-combustion CO2-rich stream, followed by directing it along a packed-bed of hybrid CuO-ZnO/ZSM5 catalysts to react with hydrogen and produce DiMethyl Ether (DME). The generated water is removed from the catalytic bed by permeation through the membrane which enables reaction equilibrium shift towards more CO2-conversion. Extra process intensification was achieved using a membrane-assisted reactive distillation reactor, where similarly several such parallel membranes were erected inside a catalytic bed to form a reactive-distillation column. This provides the opportunity for a synchronized separation of CO2 and water by a membrane, mixing the educts (i.e., hydrogen and CO2) and controlling the reaction along the catalytic bed while distilling the products (i.e., methanol, water and DME) through the catalyst loaded column. The hybrid catalyst and carbon molecular sieve membrane were developed using the synthesis methods and proved experimentally to be among the most efficient compared to the state-of-the-art. In this context, selective permeation of the membrane and selective catalytic conversion of hybrid catalysts under the targeted operating temperature range of 200–260 °C and 10–20 bar pressure were studied. For the membrane, the obtained high flux of selective CO2-permeation was beyond the Robeson upper bound. Moreover, in the hybrid catalytic structure, a combined methanol and DME yield of 15% was secured. Detailed results of catalyst and membrane synthesis and characterization along with catalyst test and membrane permeation tests are reported in this paper. The performance of various configurations of integrated catalytic and separation systems was studied through an experimentally supported simulation along with the systematic analysis of the conceptual design and operation of such reactive distillation. Focusing on the subnano-/micro-meter scale, the performance of sequential reactions while considering the interaction of the involved catalytic materials on the overall performance of the hybrid catalyst structure was studied. On the same scale, the mechanism of separation through membrane pores was analyzed. Moreover, looking at the micro-/milli-meter scale in the vicinity of the catalyst and membrane, the impacts of equilibrium shift and the in-situ separation of CO2 and steam were analyzed, respectively. Finally, at the macro-scale separation of components, the impacts of established temperature, pressure and concentration profiles along the reactive distillation column were analyzed. The desired characteristics of the integrated membrane reactor at different scales could be identified in this manner.

Hydrodynamics and OCM reaction performance in a bubbling fluidized bed reactor and a riser reactor

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

Hydrodynamic Study on the Riser of Chemical Looping Hydrogen Production System with Multiple Fluidized Bed Reactors

Effect Of The Scale-Up Process On The Reactor Performance Within The Riser: Simulation Using Ozone Decomposition

A Reaction-Separation Combined Ocm Process For High C-2 Hydrocarbon Yields

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Expanded Reactor Engineering Calculations for the Oxidative Coupling of Methane

From fundamentals to chemical engineering on oxidative coupling of methane for ethylene production: A review

A Theoretical Analysis on Oxidative Coupling of Methane in Tubular Dense Membrane Reactor

Studies on ethylene oxychlorination III. Hot model test in a fluidized bed

Consequence of products from oxidative coupling of methane in non-oxidative high temperature environment

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane

Modeling of Oxidative Coupling of Methane for Manufacture of Olefins—Part I: CFD Simulations

Study on the FCC process of a novel riser-downer coupling reactor (III): Industrial trial and-CFD modeling

New characterization models for macroscopic chemical-hydrodynamic behavior of catalytic cracking riser-reactor with interactive patterns of severe operating conditions using CFD calculations

A design kinetic and hydrodynamic study of a coupled dual fluidized bed MTO reactor-regenerator system

Study on Oxidative Coupling of Methane in Oxygen Permeable Tubular Membrane Reactor

Ethylene Production from Oxidative Coupling of Methane in Solid Oxide Electrochemical Cells

Structural Optimization of Reactor for the Enhancement of CO2 Electrochemical Reduction Based on Gas–Liquid Mixing Flow Model

Multiscale Analysis of Membrane-Assisted Integrated Reactors for CO2 Hydrogenation to Dimethyl Ether