Abstract:The conceptual design and engineering of an integrated catalytic reactor requires a thorough understanding of the prevailing mechanisms and phenomena to ensure a safe operation while achieving desirable efficiency and product yields. The necessity and importance of these requirements are demonstrated in this investigation in the case of novel membrane-assisted reactors tailored for CO2 hydrogenation. Firstly, a carbon molecular sieve membrane was developed for simultaneous separation of CO2 from a hot post-combustion CO2-rich stream, followed by directing it along a packed-bed of hybrid CuO-ZnO/ZSM5 catalysts to react with hydrogen and produce DiMethyl Ether (DME). The generated water is removed from the catalytic bed by permeation through the membrane which enables reaction equilibrium shift towards more CO2-conversion. Extra process intensification was achieved using a membrane-assisted reactive distillation reactor, where similarly several such parallel membranes were erected inside a catalytic bed to form a reactive-distillation column. This provides the opportunity for a synchronized separation of CO2 and water by a membrane, mixing the educts (i.e., hydrogen and CO2) and controlling the reaction along the catalytic bed while distilling the products (i.e., methanol, water and DME) through the catalyst loaded column. The hybrid catalyst and carbon molecular sieve membrane were developed using the synthesis methods and proved experimentally to be among the most efficient compared to the state-of-the-art. In this context, selective permeation of the membrane and selective catalytic conversion of hybrid catalysts under the targeted operating temperature range of 200–260 °C and 10–20 bar pressure were studied. For the membrane, the obtained high flux of selective CO2-permeation was beyond the Robeson upper bound. Moreover, in the hybrid catalytic structure, a combined methanol and DME yield of 15% was secured. Detailed results of catalyst and membrane synthesis and characterization along with catalyst test and membrane permeation tests are reported in this paper. The performance of various configurations of integrated catalytic and separation systems was studied through an experimentally supported simulation along with the systematic analysis of the conceptual design and operation of such reactive distillation. Focusing on the subnano-/micro-meter scale, the performance of sequential reactions while considering the interaction of the involved catalytic materials on the overall performance of the hybrid catalyst structure was studied. On the same scale, the mechanism of separation through membrane pores was analyzed. Moreover, looking at the micro-/milli-meter scale in the vicinity of the catalyst and membrane, the impacts of equilibrium shift and the in-situ separation of CO2 and steam were analyzed, respectively. Finally, at the macro-scale separation of components, the impacts of established temperature, pressure and concentration profiles along the reactive distillation column were analyzed. The desired characteristics of the integrated membrane reactor at different scales could be identified in this manner.

Multi-Objective Optimization and Multi-Criteria Decision-Making Approach to Design Multi-Tubular Packed-Bed Membrane Reactor in Oxidative Dehydrogenation of Ethane

Optimization of Dual-Impeller Configurations in a Gas–Liquid Stirred Tank Based on Computational Fluid Dynamics and Multiobjective Evolutionary Algorithm

Multiobjective Optimization of the Industrial Naphtha Catalytic Reforming Process

Scalable Multi-Objective Optimization of Industrial Purified Terephthalic Acid (PTA) Oxidation Process

Computational FLuid Dynamics, Artificial Neural Network and Genetic Algorithm As a Hybrid Method for the Design of Hydrogen Peroxide Separation Via Non-Dispersive Solvent Extraction

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Multi-objective Optimizations of Solid Oxide Co-Electrolysis with Intermittent Renewable Power Supply Via Multi-Physics Simulation and Deep Learning Strategy

An Efficient Data-Driven Approach for Modeling and Optimization of Reactivity-Controlled Compression Ignition Engine Fueled with Polyoxymethylene Dimethyl Ethers and Hydrogen

Multi-objective optimization of sustainable extractive dividing-wall column process for separating methanol and trimethoxysilane azeotrope mixture

Modeling and multi-objective optimization of commercial ethylene oxide reactor to strike a delicate balance between profit and negative environmental impact

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

Optimal Flowsheet Configuration of a Polymerization Process with Embedded Molecular Weight Distributions

Design and multi-objective optimization of reactive-extractive dividing wall column with organic Rankine cycles considering safety

Machine learning aided multi-objective optimization and multi-criteria decision making: Framework and two applications in chemical engineering

Multiscale Modeling and Simulation on Oxidative Dehydrogenation of Ethane to Ethylene

Ethylene production using oxidative dehydrogenation: effects of membrane-based separation technology on process safety & economics

Multiscale Analysis of Membrane-Assisted Integrated Reactors for CO2 Hydrogenation to Dimethyl Ether

Investigation of sustainable operation oriented- economic, process and environment based multi-criteria optimization of large scale methanol production plant

Multi-objective particle swarm optimization of industrial natural gas dehydration process

A design kinetic and hydrodynamic study of a coupled dual fluidized bed MTO reactor-regenerator system

Optimization of the Oxidative Coupling of Methane Process for Ethylene Production