Abstract:Reaction and distillation separation processes are two indispensable operating units in the chemical industry. However, a large amount of waste heat can be produced due to the presence of the reaction and distillation processes with high-temperature nature. Thus, it is of great significance to improve the economic performances of the reaction-separation processes via recovering waste heat. In the work, the recovery of waste heat from different heat sources in the reaction and distillation processes using the organic Rankine cycle (ORC) system with different working fluids is investigated taking the cumene synthesis process as an example. First, two streams with higher temperature and larger flowrates from the reaction section and distillation section are determined as the driving heat sources, while the conceptual design of the ORC system assisted reaction-separation process is completed. And then, the operation parameters of the ORC system with two heat sources and eight working fluids including R113, R123, R245ca, R245fa, R600, R600a, R601, and R601a selected by heuristic rules are optimized, aiming to maximize the annual net economic revenues (NER) using the genetic algorithm. Following, the corresponding exergy analysis of the ORC schemes driven by two heat sources with different working fluids is performed. The results illustrate that the heat of heat sources from both reaction section and separation section should be utilized since the ORC system with mentioned eight working fluids can produce positive NER, and the stream from the reaction section is more suitable as the driving heat source of the ORC system compared to that from the distillation section due to higher temperature, greater flowrates, and the coexistence of both latent heat and sensible heat. Overall, working fluids R113 and R123 are the worthiest of consideration among mentioned eight working fluids in terms of NER produced and the thermodynamic efficiency (η) of the corresponding ORC system. However, the environmental damage factors of the working fluids R113 and R123 are not preferred compared to other working fluids. Comprehensively considering economic, environmental, and thermodynamic performances, R601 are the preferred working fluid to perform the recovery of waste heat from the cumene synthesis process using the ORC system. The corresponding NER are 17.98 × 104$/a and 1.90 × 104$/a, which are 9.78% and 5.00% lower than that of the ORC system using the most economic working fluid R113, and at least 8.44% (R601a) and 2.70% (R123) higher than that of the ORC system using other working fluids for two heat sources, respectively. The η of the ORC system with R601 as working fluid can reach 17.73% and 11.15% for two heat sources, respectively, are slightly lower than that of the ORC system using R113 (19.41%) and R123 (11.49%) as working fluids.

Design and multi-objective optimization of reactive-extractive dividing wall column with organic Rankine cycles considering safety

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Towards sustainable separation of the ternary azeotropic mixture based on the intensified reactive-extractive distillation configurations and multi-objective particle swarm optimization

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Design and multi-objective optimization of hybrid reactive-extractive distillation process for separating wastewater containing benzene and isopropanol

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Design and multi-objective optimization of novel side-stream reactive-extractive distillation process with intermediate reboiler for recovering ethanol and 1,4-dioxane from wastewater

An energy sustainable approach of heat-pump assisted azeotropic divided wall column based on the organic Rankine cycle

Multi-objective optimization of sustainable extractive dividing-wall column process for separating methanol and trimethoxysilane azeotrope mixture

A new hybrid reactive-extractive distillation configuration for ternary azeotropic separation with intensification opportunity

Investigation on ternary system tetrahydrofuran/ethanol/water with three azeotropes separation via the combination of reactive and extractive distillation

Multi-objective optimization of organic Rankine cycle system for the waste heat recovery in the heat pump assisted reactive dividing wall column

Sustainable design and multi-objective optimization of heat pump assisted extractive distillation process for separating a ternary mixture of methyl acetate, tetrahydrofuran and methanol

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Multi-objective optimization and composition control of Sargent dividing-wall distillation columns

Design and optimization of organic Rankine cycle using different working fluids for recovering waste heat in reaction-separation process of cumene synthesis

Energy, exergy, economic and environmental analysis of a novel steam-driven vapor recompression and organic Rankine cycle intensified dividing wall column

Optimal design of extractive dividing-wall column using an efficient equation-oriented approach

Development of novel hybrid pre-separation/extractive reactive distillation processes for the separation of methanol/methyl acetate/ethyl acetate

Economic, environmental, energy, exergy (4E) analysis and simulated annealing algorithm optimization of dividing-wall column-intensified heterogeneous azeotropic pressure-swing distillation process