Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Design and multi-objective optimization of hybrid reactive-extractive distillation process for separating wastewater containing benzene and isopropanol

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Towards sustainable separation of the ternary azeotropic mixture based on the intensified reactive-extractive distillation configurations and multi-objective particle swarm optimization

Design and multi-objective optimization of hybrid extractive distillation process for separating the toluene-methanol-water ternary azeotrope

Design and multi-objective optimization of reactive-extractive dividing wall column with organic Rankine cycles considering safety

Design and multi-objective optimization of novel side-stream reactive-extractive distillation process with intermediate reboiler for recovering ethanol and 1,4-dioxane from wastewater

Investigation of Energy-Efficient and Sustainable Reactive/pressure-Swing Distillation Processes to Recover Tetrahydrofuran and Ethanol from the Industrial Effluent

Simulated annealing-based optimal design of energy efficient ternary extractive dividing wall distillation process for separating benzene-isopropanol-water mixtures

Investigation on energy-saving distillation for separating tetrahydrofuran/methanol/water ternary azeotropic system

Intensified hybrid reactive-extractive distillation process for the separation of water-containing ternary mixtures

Investigation on ternary system tetrahydrofuran/ethanol/water with three azeotropes separation via the combination of reactive and extractive distillation

Design and Multiobjective Optimization of a Novel Double Extractive Dividing Wall Column with a Side Reboiler Scheme for the Recovery of Ethyl Acetate and Methanol from Wastewater

Application of energy-saving hybrid distillation-pervaporation process for recycling organics from wastewater based on thermoeconomic and environmental analysis

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

Sustainable Design and Multi-Objective Optimization of Eco-Efficient Extractive Distillation with Single and Double Entrainer(s) for Separating the Ternary Azeotropic Mixture Tetrahydrofuran/ethanol/methanol

Economic, environmental, exergy (3E) analysis and multi-objective genetic algorithm optimization of efficient and energy-saving separation of diethoxymethane/toluene/ethanol by extractive distillation with mixed extractants

Sustainable Process Design and Multi-Objective Optimization of Efficient and Energy-Saving Separation of Xylene Isomers Via Extractive Distillation Based on Double Extractants

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Process Design and Multi-Objective Optimization for Separation of Ternary Mixtures with Double Azeotropes Via Integrated Quasi-Continuous Pressure-Swing Batch Distillation