Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Investigation on energy-saving distillation for separating tetrahydrofuran/methanol/water ternary azeotropic system

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Investigation of Energy-Efficient and Sustainable Reactive/pressure-Swing Distillation Processes to Recover Tetrahydrofuran and Ethanol from the Industrial Effluent

Investigation on ternary system tetrahydrofuran/ethanol/water with three azeotropes separation via the combination of reactive and extractive distillation

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

Energy-efficient Separation of a Ternary Azeotropic Mixture Via Azeotropic Reflux-Induced Sequences Based on the Intensified Pressure-Swing Distillation

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Sustainable Design and Multi-Objective Optimization of Eco-Efficient Extractive Distillation with Single and Double Entrainer(s) for Separating the Ternary Azeotropic Mixture Tetrahydrofuran/ethanol/methanol

Design and eco-efficiency analysis of sustainable extractive distillation process combining preconcentration and solvent recovery functions for separating the tetrahydrofuran/ethanol/water ternary multi-azeotropic mixture

Intensified hybrid reactive-extractive distillation process for the separation of water-containing ternary mixtures

Sustainable separation of ternary azeotropic mixtures based on enhanced extractive distillation/pervaporation structure and multi-objective optimization

Towards energy saving and carbon reduction of pressure-swing distillation for separating the ternary azeotropic mixtures by thermodynamic insights and process intensification

Efficient Separating Dipropyl Ether/isopropanol/water Azeotrope by Extractive Distillation with Mixed Entrainer Based on Ionic Liquid

Insights on sustainable separation of ternary azeotropic mixture tetrahydrofuran/ethyl acetate/water using hybrid vapor recompression assisted side-stream extractive distillation

An Efficient Multi-Criteria Decision Making for Assessing the Optimization of Reactive Extractive Distillation in Terms of Economy, Environment and Safety

Design and multi-objective optimization of hybrid extractive distillation process for separating the toluene-methanol-water ternary azeotrope

Energy-Saving Reduced-Pressure Extractive Distillation with Heat Integration for Separating the Biazeotropic Ternary Mixture Tetrahydrofuran–Methanol–Water

Energy-efficient heterogeneous triple-column azeotropic distillation process for recovery of ethyl acetate and methanol from wastewater

Sustainable and Efficient Separation of Ternary Multi-Azeotropic Mixture Butanone/ethanol/water Based on the Intensified Reactive Extractive Distillation: Process Design, Multi-Objective Optimization, and Multi-Criteria Decision-Making

Towards sustainable separation of the ternary azeotropic mixture based on the intensified reactive-extractive distillation configurations and multi-objective particle swarm optimization

Design and Control of an Energy-Efficient Alternative Process for the Separation of Methanol/toluene/water Ternary Azeotropic Mixture