Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Towards energy saving and carbon reduction of pressure-swing distillation for separating the ternary azeotropic mixtures by thermodynamic insights and process intensification

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Energy-saving improvement of heat integration and heat pump for separating multi-azeotropes mixture via novel pressure swing distillation

Insights on sustainable separation of ternary azeotropic mixture tetrahydrofuran/ethyl acetate/water using hybrid vapor recompression assisted side-stream extractive distillation

A different strategy to reduce energy consumption for designing heterogeneous decanter-assisted advanced pressure-swing distillation process

Analysis and performance enhancement of heat pump technology assisted pressure-swing distillation process in the separation of azeotropic mixtures

Adding Rectifying/Stripping Section Type Heat Integration to A Pressure-Swing Distillation (psd) Process

Design and energy-saving strategy of sustainable pressure-swing distillation with thermally and electrically coupled intensification for separating ternary mixture with multiple azeotropes

Energy saving design and optimization of pressure-swing assisted ternary heterogenous azeotropic distillations

Energy-Saving Reduced-Pressure Extractive Distillation with Heat Integration for Separating the Biazeotropic Ternary Mixture Tetrahydrofuran–Methanol–Water

Investigation on energy-saving distillation for separating tetrahydrofuran/methanol/water ternary azeotropic system

Improving the economy and energy efficiency of separating water/acetonitrile/isopropanol mixture via triple-column pressure-swing distillation with heat-pump technology

Economic and Energy-Saving Heat Pump Assisted Triple-Column Pressure-Swing Distillation for the Separation of Methanol/Ethyl Acetate/Methyl Via Thermodynamic Insights and Multi-Objective Optimization

Analysis of Heat Integration, Intermediate Reboiler and Vapor Recompression for the Extractive Distillation of Ternary Mixture with Two Binary Azeotropes

Intensified hybrid reactive-extractive distillation process for the separation of water-containing ternary mixtures

Eco-efficient vapor recompression-assisted pressure-swing distillation process for the separation of a maximum-boiling azeotrope

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

Towards sustainable separation of the ternary azeotropic mixture based on the intensified reactive-extractive distillation configurations and multi-objective particle swarm optimization

Applicability exploration and sustainable assessment of heat integration and vapor recompression heat pump to side-stream extractive distillation processes for separating ternary azeotropic system

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Heat integration and dynamic control of reactive pressure-swing distillation for separation of tetrahydrofuran/ethanol/water