Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Economic, environmental, exergy (3E) analysis and multi-objective genetic algorithm optimization of efficient and energy-saving separation of diethoxymethane/toluene/ethanol by extractive distillation with mixed extractants

Investigation on energy-saving distillation for separating tetrahydrofuran/methanol/water ternary azeotropic system

Efficient Separating Dipropyl Ether/isopropanol/water Azeotrope by Extractive Distillation with Mixed Entrainer Based on Ionic Liquid

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Design and multi-objective optimization of hybrid extractive distillation process for separating the toluene-methanol-water ternary azeotrope

Environmental, Economic and Exergy Analysis of Separation of Ternary Azeotrope by Variable Pressure Extractive Distillation Based on Multi-Objective Optimization

Sustainable Design and Multi-Objective Optimization of Eco-Efficient Extractive Distillation with Single and Double Entrainer(s) for Separating the Ternary Azeotropic Mixture Tetrahydrofuran/ethanol/methanol

Energy-saving Investigation of Organic Material Recovery from Wastewater Via Thermal Coupling Extractive Distillation Combined with Heat Pump Based on Thermoeconomic and Environmental Analysis

Economic, Environmental, Energy, Exergy (4E) and Inherent Safety Analysis of Hybrid Extractive-Heteroazeotropic Distillation for Sustainable Treatment of Crude N-Butanol Waste Liquor

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Separation for diethoxymethane/ethanol/water by a thermally coupled extractive pressure swing distillation process with mixed solvent

Energy Efficient and Environmentally Friendly Pervaporation-Distillation Hybrid Process for Ternary Azeotrope Purification.

Mechanism analysis and energy-saving intensified exploration of green mixed solvents extractive distillation to separate ether-containing azeotropes

Economy, Exergy, Energy Consumption and Environmental Human Toxicity Potential Assessment of Vacuum Extractive Distillation Coupled Pervaporation Process for Separating Acetone/Isopropanol/Water Multi-azeotropes System

Energy, Economic and Environmental Evaluations for the Separation of Ethyl Acetate/ethanol/water Mixture Via Distillation and Pervaporation Unit

Design and eco-efficiency analysis of sustainable extractive distillation process combining preconcentration and solvent recovery functions for separating the tetrahydrofuran/ethanol/water ternary multi-azeotropic mixture

Energy-saving Research on the Separation of Isopropyl Acetate and Isopropanol Azeotrope Using Pressure-Swing Distillation Based on Phase Equilibrium

Energy-saving heat integrated extraction-azeotropic distillation for separating isobutanol-ethanol-water

Energy-efficient heterogeneous triple-column azeotropic distillation process for recovery of ethyl acetate and methanol from wastewater