Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Separation for diethoxymethane/ethanol/water by a thermally coupled extractive pressure swing distillation process with mixed solvent

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Process Design and Multi-Objective Optimization of Efficient Heat Utilization Distillation Based on the Influence of Pressure and Entrainer Flow on Separation Performance

Efficient Separating Dipropyl Ether/isopropanol/water Azeotrope by Extractive Distillation with Mixed Entrainer Based on Ionic Liquid

Mechanism Analysis and Multiobjective Optimization of Efficient and Energy-Saving Separation of Green Fuel Additives via Extractive Pressure Swing Distillation with an Ionic Liquid Mixed Entrainer

Economic, environmental, exergy (3E) analysis and multi-objective genetic algorithm optimization of efficient and energy-saving separation of diethoxymethane/toluene/ethanol by extractive distillation with mixed extractants

Sustainable Design and Multi-Objective Optimization of Eco-Efficient Extractive Distillation with Single and Double Entrainer(s) for Separating the Ternary Azeotropic Mixture Tetrahydrofuran/ethanol/methanol

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

SEPARATION OF ETHANOL-WATER AZEOTROPE MIXTURES USING EXTRACTIVE DISTILLATION METHOD

Environmental, Economic and Exergy Analysis of Separation of Ternary Azeotrope by Variable Pressure Extractive Distillation Based on Multi-Objective Optimization

Mechanism analysis and energy-saving intensified exploration of green mixed solvents extractive distillation to separate ether-containing azeotropes

Enhanced Efficient Extractive Distillation by Combining Heat-Integrated Technology and Intermediate Heating

Sustainable separation of ternary azeotropic mixtures based on enhanced extractive distillation/pervaporation structure and multi-objective optimization

Insights on sustainable separation of ternary azeotropic mixture tetrahydrofuran/ethyl acetate/water using hybrid vapor recompression assisted side-stream extractive distillation

Mechanism analysis and performance evaluation of clean and efficient recovery of N-heptanol/N-hexanol from wastewater via extractive distillation with green mixed entrainer

Process Design and 4E Analysis of Different Distillations of Ethyl Acetate/ethanol/cyclohexane Separation Based on Extractive and Pressure-Swing Properties

Energy-efficient heterogeneous azeotropic distillation coupling with pressure swing distillation for the separation of IPA/DIPE/Water mixture

Energy-efficient Extractive Pressure-Swing Distillation for Separating Binary Minimum Azeotropic Mixture Dimethyl Carbonate and Ethanol

Energy-efficient Separation of a Ternary Azeotropic Mixture Via Azeotropic Reflux-Induced Sequences Based on the Intensified Pressure-Swing Distillation

A novel sustainable separation process based on special azeotropic behavior of benzene/ethanol/butanone: Process design and multi-performance evaluation

Insight into separation of azeotrope in wastewater to achieve cleaner production by extractive distillation and pressure-swing distillation based on phase equilibrium