Abstract:Complex multi-azeotrope and multi-boundary lead to immense challenges of solvent selection for the separation of the ternary multi-azeotrope system. In principle, integrating reactive distillation (RD) with extractive distillation (ED) is fundamental to achieve higher energy efficiencies and to reduce process expenses and environmental impacts. However, these hybrid distillation processes that can overcome the challenges have not been fully investigated. To this end, this article developed and compared the energy-saving reactive-extractive hybrid distillation processes for purification and recovery of the high-value ethyl acetate and EtOH from the wastewater containing multi-azeotrope. The proposed hybrid distillation processes include triple-column reactive-ED (TCRED), double-column reactive-ED (DCRED). In the hybrid processes, ethylene glycol (EG) and dimethyl sulfoxide (DMSO) are adopted as solvents in the ED, while ethylene oxide is introduced as reactant to perform the hydration reaction in the RD process. These separation schemes are optimized with the objective of the minimum total annual costs (TAC) via genetic algorithm procedure to obtain the optimal design parameters. Subsequently, environmental assessment indicator (CO2 emissions) is also calculated to perform the comprehensive analysis for the presented separation processes. The results demonstrate that the hybrid distillation processes coupled with RD can significantly reduce process costs as well as CO2 emissions compared to the conventional TCED process, especially for the DCRED process. The DCRED scheme with EG as solvent has the lowest TAC and CO2 emissions, with a reduction of 43.29%/35.10% TAC and 38.06%/24.73% CO2 emissions compared with the TCRED configurations with EG or DMSO as solvents, respectively. The major contributions of this work are to facilitate the future development for conceptual design of the hybrid distillation processes containing RD.

Energy saving design and optimization of pressure-swing assisted ternary heterogenous azeotropic distillations

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

A different strategy to reduce energy consumption for designing heterogeneous decanter-assisted advanced pressure-swing distillation process

Towards energy saving and carbon reduction of pressure-swing distillation for separating the ternary azeotropic mixtures by thermodynamic insights and process intensification

Design and energy-saving strategy of sustainable pressure-swing distillation with thermally and electrically coupled intensification for separating ternary mixture with multiple azeotropes

An Improvement Scheme for Pressure-Swing Distillation with and Without Heat Integration Through an Intermediate Connection to Achieve Energy Savings

Energy-saving improvement of heat integration and heat pump for separating multi-azeotropes mixture via novel pressure swing distillation

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Investigation on energy-saving distillation for separating tetrahydrofuran/methanol/water ternary azeotropic system

Economic, environmental, energy, exergy (4E) analysis and simulated annealing algorithm optimization of dividing-wall column-intensified heterogeneous azeotropic pressure-swing distillation process

Sustainable separation of ternary azeotropic mixtures based on enhanced extractive distillation/pervaporation structure and multi-objective optimization

Energy-efficient heterogeneous azeotropic distillation coupling with pressure swing distillation for the separation of IPA/DIPE/Water mixture

Energy-Saving Reduced-Pressure Extractive Distillation with Heat Integration for Separating the Biazeotropic Ternary Mixture Tetrahydrofuran–Methanol–Water

The conceptual design and process intensification of the separation of ternary azeotropic mixture with heterogeneous characteristic

Towards sustainable separation of the ternary azeotropic mixture based on the intensified reactive-extractive distillation configurations and multi-objective particle swarm optimization

Insights on sustainable separation of ternary azeotropic mixture tetrahydrofuran/ethyl acetate/water using hybrid vapor recompression assisted side-stream extractive distillation

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Thermodynamic efficiency enhancement of pressure-swing distillation process via heat integration and heat pump technology

Improved design and optimization for separating tetrahydrofuran–water azeotrope through extractive distillation with and without heat integration by varying pressure

Design and multi-objective optimization of hybrid extractive distillation process for separating the toluene-methanol-water ternary azeotrope

Economic and Energy-Saving Heat Pump Assisted Triple-Column Pressure-Swing Distillation for the Separation of Methanol/Ethyl Acetate/Methyl Via Thermodynamic Insights and Multi-Objective Optimization