Abstract:Aromatics are one of the most important bulk chemicals used in modern industries, rapid economic development and environmental issues that originate from the use of fossil fuels force us to search for clean and sustainable ways to produce fuels and chemicals from high carbon and renewable resources like syngas. We herein report, a composite catalyst containing, partially reducible and highly active manganese oxide and nano size H-ZSM-5 with short b-axis, prepared for the direct conversion of syngas to aromatics. We achieved high aromatic selectivity of 83% at a stable CO conversion of 21% for at least 200 hours without any deactivation. Manganese oxide not only helped in C-O bond activation, and formation of methanol, alkenes and dienes, but it also helped in aromatic desorption from H-ZSM-5 pores. On the other hand, H-ZSM-5 facilitated immediate withdrawal of intermediates from MnOx into its pores and converted them into aromatics. This both way desorption capability of composite catalysts enhanced conversion and selectivity when they were present in a proximity of few nm distance from each other. The key intermediates species during induction time were found to be cyclopentenones, furans, aldehydes and OH containing compounds. Theses intermediate species were converted to aromatics through multiple reaction routes, such as, Gatterman-Koch reaction, Aldol-Condensation and Prins reaction mechanisms. Factors that were responsible for consistent performance and long life of composite catalyst were, nano-size H-ZSM-5 with short b-axis, aromatic desorption ability of manganese oxide, and the presence of H2 in reaction system. This work paved the way for the use of single metal oxide catalyst for efficient aromatization of syngas in a single step process.

A Multi-Stage Fluidized Bed Strategy for the Enhanced Conversion of Methanol into Aromatics

Simulation of multi-fluidized-bed in series for methanol to olefins

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Efficient Conversion of Methane to Aromatics in the Presence of Methanol at Low Temperature

High-yield Production of Aromatics from Methanol Using a Temperature-Shifting Multi-Stage Fluidized Bed Reactor Technology

Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Effect of Metal on the Methanol to Aromatics Conversion over Modified ZSM-5 in the Presence of Carbon Dioxide

Conversion of Methanol with C5–C6 Hydrocarbons into Aromatics in a Two-Stage Fluidized Bed Reactor

Decentralized Methanol Feed in a Two-Stage Fluidized Bed for Process Intensification of Methanol to Aromatics

Temperature-dependent Secondary Conversion of Primary Products from Methanol Aromatization in a Two-Stage Fluidized Bed

Conversion of methanol to aromatics in fluidized bed reactor

Utilization of Metal-Functionalized ZSM-5 for Methanol and Low-Carbon Hydrocarbon Coupling Aromatization

Kinetics on the Integration of Methanol Aromatization with Raffinate Oil over ZSM-5/ZSM-11 Zeolite

Direct Transformation of Syngas to Aromatics over Na-Zn-Fe5C2 and Hierarchical HZSM-5 Tandem Catalysts

Influence of Catalyst Acidity on Dealkylation, Isomerization and Alkylation in Mta Process

Two-way Desorption Coupling to Enhance Syngas to Aromatics by MnO/H-ZSM-5

Boosting Methanol-Mediated CO2 Hydrogenation into Aromatics by Synergistically Tailoring Oxygen Vacancy and Acid Site Properties of Multifunctional Catalyst

High Selectivity to Aromatics by a Mg and Na Co-modified Catalyst in Direct Conversion of Syngas

Aromatics Production via Methanol-Mediated Transformation Routes

Co-conversion of Methanol and N -Hexane into Aromatics Using Intergrown ZSM-5/ZSM-11 As a Catalyst

Multiphase catalytic reactors for methanol to olefins