Abstract:We numerically assessed the potential of a solar reactor concept for efficient fuel processing under concentrated solar irradiation. This design integrates a cavity receiver, a tubular solid oxide electrolyzer, and the concentrated photovoltaic cells into a single reactor. The tubular electrolyzer simultaneously acts as the solar absorber (for reactant heating) and as the electrochemical device (for water and carbon dioxide splitting). A multi-physics axisymmetric model was developed, considering charge transfer in the membrane-electrolyte assembly, electrochemical and thermochemical reactions at the electrodes' reaction sites, species and fluid flow in the fluid channels and electrodes, and heat transfer for the whole reactor. A high solar-to-fuel efficiency was predicted (18.6% and 12.3% for indirectly and directly connected approaches, respectively, both at C-PV = 385 and C-ap = 1273). For synthesis gas production, the upper current density threshold to avoid carbon deposition was found to be 8725 A/m(2) at reference conditions. A continuous range of H-2/CO molar ratios of the synthesis gas was achieved by varying the inlet H2O/CO2 ratio, the irradiation concentration, and the operation current density. Efficiency-optimized operating conditions and design guidelines are presented. Our novel and integrated solar reactor concept for the solar-driven high-temperature electrolysis of H2O and CO2 has the potential to provide a simple, high solar-to-fuel efficiency reactor at reduced cost, all given by the reduced transmission losses of the integrated reactor design.

Fluidized Bed Reactors for Solar-Grade Silicon and Silane Production

MD Simulation and Transport Property Analysis of Silicon in High-Temperature Molten Fluoride Salts Electrolyte

A Hot-Wall Tubular Reactor for Silane Pyrolysis: Modeling and Simulation

Influence of Silicon Size Distribution on Hydrochlorination Process of Solar-grade Silicon in Spouted Reactor via MP-PIC Approach

CFD-Aided Design for Polysilicon Production System

Hydrodynamic behaviors of an internally circulating fluidized bed with wide-size-distribution particles for preparing polysilicon granules

Study on Internal Circulation Fluidized Bed Reactor for Preparing Polysilicon Granules

Development of a polysilicon chemical vapor deposition reactor using the computational fluid dynamics method

Heat and mass transfer characteristics of three-dimensional bell-shaped polysilicon chemical vapor deposition reactor

An Integrated Concentrated Solar Fuel Generator Utilizing a Tubular Solid Oxide Electrolysis Cell As Solar Absorber

Simulation of Heat Transfer in a Vertical Tubular CVD Reactor

CFD Simulation of the Hydrodynamic Behavior in an Internally Circulating Fluidized Bed Reactor for Producing Polysilicon Granules

Numerical simulation of granular silicon growth and silicon fines formation process in polysilicon fluidized bed

Engineering Optimization of Producing High-Purity Dichlorosilane in a Fixed-Bed Reactor by Trichlorosilane Decomposition

Silane Pyrolysis to Silicon Rod in A Bell-Jar Reactor at High Temperature and Pressure: Modeling and Simulation

Experimental and Numerical Study on Thermal Performance of an Indirectly Irradiated Solar Reactor with a Clapboard-Type Internally Circulating Fluidized Bed

An efficient and closed-loop approach to convert silicon tetrachloride to silicon nanospheres anode materials via hydrogen thermal plasma

An innovative solar reactor with Gaussian-pattern geometry for syngas production from dry reforming of methane

Numerical Simulations of Particle Growth in a Silicon-Cvd Fluidized Bed Reactor Via a CFD–PBM Coupled Model

Method and device for preparing high purity polysilicon particles by using fluid bed reactor

Method for preparing high purity polysilicon particle with fluidized bed and bed fluidizing reactor