Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

The fluid-dynamic study and CFD simulation of bubbling fluidized bed for Si3N4 synthesis

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Numerical Simulation of Casting Filling Process of Composites Reinforced with Nano SiC Based on Smoothed Particle Hydrodynamics

Experimental Simulation Studies on Non-Uniform Fluidization Characteristics of Two-Component Particles in a Bubbling Fluidized Bed

Numerical simulation of granular silicon growth and silicon fines formation process in polysilicon fluidized bed

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Numerical Investigation on the Two Phase Flow Behaviors in Supercritical Water Fluidized Bed with Swirling Flow Distributor

Optimization of simulation model adaptability and CFD of particles of Geldart‐B in a gas–solid fluidized bed for silicone monomer synthesis

Study on Condensed Matter Simulated by Multiphase Fluid-Solid Coupling Fluid Mechanics

CFD-DEM study of impacts of the porous distributor medium on fluidization characteristics of a 2D-fluidized bed

Analysis and Verification of Silicon Nitride Super-micro Powder Synthesis with FBR-CVD Technique

Computational Fluid Dynamics-Discrete Element Method Investigation of Solid Mixing Characteristics in an Internally Circulating Fluidized Bed

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension