Abstract:The boron nitride reinforced fused silica (BN/SiO2) ceramics are excellent high-temperature wave-transparent candidates, but encumbered by the unsatisfactory reliability and economy until now. Herein, promising BN whisker reinforced SiO2 (BNW/SiO2) ceramics are fabricated via hot-pressing, aiming to provide fundamental insight into their microstructural evolution, mechanical and dielectric properties. The densification behaviour and microstructural evolution are characterized by step-testing the sintering temperature and the BNW content, determining that SiO2 matrix undergoes crystal nucleus breeding (≤1300 °C), followed by nucleation and growth (>1300 °C), and BNW presents a uniform and stable structure (≤1350 °C) and skin-core structure (1450 °C), respectively. The underlying strengthening and toughening mechanisms are elucidated through constructing a multilevel porosity dependence of mechanical behaviour associated with the BNW content. Compared with 5 wt. % BNW/SiO2 ceramic sintered at 1350 °C (S5-1350), the lightweight 20 wt. % BNW/SiO2 ceramic sintered at 1300 °C (S20-1300) exhibits 619.1% higher machinability parameter while maintaining the mechanical properties. Moreover, the lightweight S20-1300 possesses a low dielectric constant (ε) of 3.77, loss tangent (tan δ) of 1.25 × 10-3 and coefficient of thermal expansion (CTE) of 1.34 × 10-6 K-1. The insights obtained from this study would help to advance the application of BN/SiO2 ceramics in high-temperature radome.

Fabrication and microstructure of in-situ synthesized SiBON composites

In situ synthesis of PcBN composites by Sialon combined with cBN-TiB2-AlN and their properties

Fabrication and Properties of SiO2-BN-Si3N4 Composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Characterization and Microstructural Evolution of Continuous BN Ceramic Fibers Containing Amorphous Silicon Nitride

Ion-irradiation effect on swelling and microstructure of BN particle dispersed liquid phase sintering SiC

Crystallization Behavior of Amorphous Si2bc3n Ceramic Monolith Subjected to High Pressure

Effects of boron content on the structure and magnetic properties of Fe81-xSi13BxMo2Cr1Cu1P2 nanocrystalline alloys

High‐Pressure Synthesis of Amorphous Si3N4 and SiBN‐based Monoliths Without Sintering Additives

Effect of sintering temperature on microstructure and mechanical properties of boron nitride whisker reinforced fused silica composites

Fabrication and Mechanical Properties of Boron Nitride Nanotube Reinforced Silicon Nitride Ceramics

Silicon nitride/boron nitride ceramic composites fabricated by reactive pressureless sintering

Fabrication of Boron Nitride Dispersed Nanocomposites by Chemical Processing and Their Mechanical Properties

Overall fabrication of uniform BN interphase on 2.5D-SiC fabric via precursor-derived methods

Influence of sintering temperature on the crystallization and mechanical properties of BN‐MAS composites

Microstructure control of BN interface and its effect on mechanical behavior of SiC f /SiC composites

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Synthesis of SiC/BN nanocomposite powders by carbothermal reduction and nitridation of borosilicate glass, and the properties of their sintered composites

Boron nitride (BN) and BN based multiple-layer interphase for SiCf/SiC composites: A review

Mechanical Properties and Microstructure of in Situ Synthesized ZrB 2 -Zrn 1− X Composites