Abstract:This study investigates AA5083 boron nitride (BN) nanocomposites with varying BN content, produced via powder metallurgy. Emphasizing the impact of BN on microstructure and mechanical properties, the research highlights enhanced compressive strength and homogenous dispersion. Detailed analyses using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and electron backscatter diffraction offer insights into the materials' potential for aerospace, automotive, and marine applications. The as‐received aluminum alloy (AA5083) powders (44 μm) and hexagonal boron nitride (BN) nanoparticles (65–75 nm) are used to fabricate AA5083‐BN nanocomposites with varying BN content (0, 3, 6, 9, and 12 wt%). A powder metallurgy solid‐state method is employed, involving ball milling for 20 h at 100 rpm with a ball‐to‐powder mass ratio of 10:1. The processed powders are then consolidated through forging–sintering at 550 °C for 30 min, followed by hot forging at 225 MPa. The microstructure is examined using X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray, transmission electron microscopy, and electron backscatter diffraction to understand the effect of processing variables. The compaction behavior is investigated both experimentally and empirically, revealing a relative green density exceeding 88% at 500 MPa. The empirical models display coefficients of determination (R2 values) exceeding 99% for predicting the compaction behavior. Compression tests on bulk samples show that BN reinforcement significantly enhances ultimate compressive strength, with values reaching 473.256 ± 5.54, 536.374 ± 2.87, 567.694 ± 4.22, and 601.911 ± 6.54 MPa for TRB‐3, TRB‐6, TRB‐9, and TRB‐12, respectively. The developed composites achieve relative densities greater than 97%, indicating promising applications in the aerospace, automotive, and marine industries.

Fabrication of Boron Nitride Dispersed Nanocomposites by Chemical Processing and Their Mechanical Properties

Synthesis of SiC/BN nanocomposite powders by carbothermal reduction and nitridation of borosilicate glass, and the properties of their sintered composites

Hexagonal boron nitride-based composites: an overview of processing approaches and mechanical properties

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Boron Nitride?Aluminum Nitride Ceramic Composites Fabricated by Transient Plastic Phase Processing

Fabrication of machinable AlN–BN composites with high thermal conductivity by pressureless sintering turbostatic BN-coated AlN nanocomposite powders

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Fabrication and Properties of SiO2-BN-Si3N4 Composites

High-pressure Synthesis of Al2O3-cBN Composites: Effect of Thermodynamic Condition and Cbn Volume Fraction on Their Microstructure and Properties

Fabrication of Thermally Conductive Polymer Composites Based on Hexagonal Boron Nitride: Recent Progresses and Prospects

Reaction-Bonded Boron Nitride-Aluminum Nitride Ceramic Composites

Fabrication of hexagonal boron nitride based ceramics by combustion synthesis

Synthesis, Microstructural Investigation, and Mechanical Behavior of AA5083/Boron Nitride Nanocomposite

Design and Fabrication of Machinable Al<sub>2</sub>O<sub>3</sub>/h-BN Composites and FGMs

Silicon nitride/boron nitride ceramic composites fabricated by reactive pressureless sintering

The Structure and Properties of Composite Compacts Made of High-Alloy Powder Containing Boron Nitride Additives

Synthesis, mechanical properties, and microstructure of dual-matrix (DM) aluminum-boron nitride nanotube (Al-BNNT) composites

Synthesis and characterization of mechanical properties of boron–carbon-based superhard composites

Fabrication and Mechanical Properties of Boron Nitride Nanotube Reinforced Silicon Nitride Ceramics

Optical, Mechanical and Tribological Properties of Boronnitride Dispersed Silicon Nitride Ceramics

Recent Progress in Fabrication and Application of BN Nanostructures and BN-Based Nanohybrids