Abstract:This study investigates AA5083 boron nitride (BN) nanocomposites with varying BN content, produced via powder metallurgy. Emphasizing the impact of BN on microstructure and mechanical properties, the research highlights enhanced compressive strength and homogenous dispersion. Detailed analyses using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and electron backscatter diffraction offer insights into the materials' potential for aerospace, automotive, and marine applications. The as‐received aluminum alloy (AA5083) powders (44 μm) and hexagonal boron nitride (BN) nanoparticles (65–75 nm) are used to fabricate AA5083‐BN nanocomposites with varying BN content (0, 3, 6, 9, and 12 wt%). A powder metallurgy solid‐state method is employed, involving ball milling for 20 h at 100 rpm with a ball‐to‐powder mass ratio of 10:1. The processed powders are then consolidated through forging–sintering at 550 °C for 30 min, followed by hot forging at 225 MPa. The microstructure is examined using X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray, transmission electron microscopy, and electron backscatter diffraction to understand the effect of processing variables. The compaction behavior is investigated both experimentally and empirically, revealing a relative green density exceeding 88% at 500 MPa. The empirical models display coefficients of determination (R2 values) exceeding 99% for predicting the compaction behavior. Compression tests on bulk samples show that BN reinforcement significantly enhances ultimate compressive strength, with values reaching 473.256 ± 5.54, 536.374 ± 2.87, 567.694 ± 4.22, and 601.911 ± 6.54 MPa for TRB‐3, TRB‐6, TRB‐9, and TRB‐12, respectively. The developed composites achieve relative densities greater than 97%, indicating promising applications in the aerospace, automotive, and marine industries.

Boron Nitride?Aluminum Nitride Ceramic Composites Fabricated by Transient Plastic Phase Processing

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Reaction-Bonded Boron Nitride-Aluminum Nitride Ceramic Composites

Improvement in mechanical properties in AlN-h-BN composites with high thermal conductivity

Fabrication of Boron Nitride Dispersed Nanocomposites by Chemical Processing and Their Mechanical Properties

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Fabrication of machinable AlN–BN composites with high thermal conductivity by pressureless sintering turbostatic BN-coated AlN nanocomposite powders

Silicon nitride/boron nitride ceramic composites fabricated by reactive pressureless sintering

High-pressure Synthesis of Al2O3-cBN Composites: Effect of Thermodynamic Condition and Cbn Volume Fraction on Their Microstructure and Properties

Reactive synthesis of alumina-boron nitride composites

Synthesis, Microstructural Investigation, and Mechanical Behavior of AA5083/Boron Nitride Nanocomposite

Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering

Fabrication of BN-AlN-TiB2 Compound Conductive Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing

Effect of hexagonal boron nitride content on the anisotropy of hot-press-sintered AlN/BN composite ceramics

The Structure and Properties of Composite Compacts Made of High-Alloy Powder Containing Boron Nitride Additives

Thermal Conductive Composites Reinforced Via Advanced Boron Nitride Nanomaterials

Preparation and Properties of BN-SiO<sub>2</sub> Composite Ceramics

Effects of TiAl Alloy as a Binder on Cubic Boron Nitride Composites

Cold‐Sprayed Boron‐Nitride‐Nanotube‐Reinforced Aluminum Matrix Composites with Improved Wear Resistance and Radiation Shielding

Microstructure and Resistivity of Machinable AlN/h-BN Ceramic Nanocomposites