Abstract:SiAlON ceramics are of interest for high‐risk applications such as biomedical implants and combustion engine turbines. This work is part of a larger study aimed at leveraging atomic‐ or molecular‐scale additives to control the densification, microstructures, and ultimate structural properties of SiAlONs. Here, we investigate the effects of boron in silicon nitride‐based ceramics. The present work demonstrates a possible chemical method for controlling the microstructural development of SiAlONs by incorporating boric acid (H3BO3) into the starting powder blend. Raman spectroscopy and 11B solid‐state magic angle spinning nuclear magnetic resonance cooperatively indicate that after sintering, boron exists in threefold coordination with nitrogen in the turbostratic boron nitride (t‐BN) structure. The results of this work indicate that the incorporation of boron and generation of t‐BN bonding in the SiAlON system result in a narrower grain size distribution, a suppression of second phases such as yttrium aluminosilicates, and ultimately, increased flexure strength. A separate fractographic study showed that SiAlONs fabricated with 3 wt% boric acid exhibited fracture origins such as subtle surface flaws or cracks, while lower dopant levels and undoped SiAlONs typically failed from flaws such as inclusions or large grains. It is argued that the modification of the intergranular glass chemistry and resulting generation of t‐BN reduces atomic diffusion through the grain boundary phase and inhibits the crystallization of second phases as well as exaggerated grain growth that often characterizes the development of β′‐SiAlON.

Ion-irradiation effect on swelling and microstructure of BN particle dispersed liquid phase sintering SiC

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Microstructural Evolution of Polymer Derived SiC Ceramics and SiC/SiC Composite under 1.8MeV Electron Irradiation

Irradiation response of liquid-phase sintered SiC assisted with Y2O3-Al2O3 sintering additive at 300°C up to 100 dpa

Effects of ion irradiation on microstructures and mechanical properties of SiOC nanocomposites

Investigation of the damage behavior in SiC without any additives irradiated with Si ions by GIXRD, Raman and TEM

Structure and fracture behavior of ion-beam-modified SiC-Al2O3-ZrO2 ceramic composites

The Effect of SiC Content on Microstructure and Microwave Heating Rate of h-BN/SiC Ceramics Fabricated by Spark Plasma Sintering

Preparation, microstructure and ion-irradiation damage behavior of Al4SiC4-added SiC ceramics

Irradiation effects in 6H–SiC induced by neutron and heavy ions: Raman spectroscopy and high-resolution XRD analysis

Helium irradiation induced microstructural damages and mechanical response of Al2O3-ZrO2-SiC composites

Exploration of an atomic‐scale boron additive in SiAlON ceramics

Characterization of microstructure and hardening of SiC ceramic brazed joint using TiZrCuNi filler irradiated by He ions

The microstructure and physical properties of AlN and SiC ceramics after irradiation with 2 MeV Au ions

Grain Boundary Effects on Defect Production and Mechanical Properties of Irradiated Nanocrystalline Sic

Grain boundary effects on chemical disorders and amorphization-induced swelling in 3C-SiC under high-temperature irradiation: from atomic simulation insight

Characterization and Microstructural Evolution of Continuous BN Ceramic Fibers Containing Amorphous Silicon Nitride

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

Novel microstructures on the surfaces of single crystal silicon irradiated by intense pulsed ion beams

Characterization of Radiation Damage Induced by B and B4 Ion Implantation into Silicon

Fabrication and properties of porous boron nitride/silicon oxynitride ceramic composites via gas pressure sintering