Abstract:To further improve the thermal shock resistance and ablation resistance of SiBCN system ceramics targeted much harsh environment, both ultra-high temperature ceramic phases and carbon fibers are expected to be incorporated simultaneously as the reinforcements. However, tough problems like difficulty in densification as well as degradation of C fibers (Cf) due to interfacial reaction usually cannot be avoided. Thus, in this study, Zr as well as chopped Cf with BN coating were introduced into SiBCN ceramics by mechanical alloying and after hot-pressing sintering to prepare C/SiBCNZr composites. The structure and phase component development have been characterized in detail by XRD, SEM, TEM and XPS etc., and mechanical properties, fracture behavior and toughening mechanisms were also investigated. Zr-B and Zr-O bonds are detected besides Si-C, N-B and N-B-C bonds when pre-alloyed ZrB2 amorphous powder was incorporated into SiBCN system by further mechanical-alloying treatment. After hot-pressing, the ultra-high temperature phases of ZrB2 and ZrN were formed as expected besides the original matrix phases of BN(C) and SiC. Excellent mechanical properties can be obtained for SiBCNZr ceramic. The BN coating on carbon fibers successfully avoids the severe fiber degradation and makes it possible for moderating strong interface bonding, which ensuring the debonding, crack deflection, fiber pulling-out and bridging during the fracture. As a result, the C/SiBCNZr composites retain good mechanical properties and fractures in a pseudoplastic fracture manner, showing better potential applications in harsh environments. Optimization of the BN coating on Cf and Zr incorporation by pre-mechanical alloying can be a good route to achieve Cf/SiBCNZr composites with a better balance between thermal shock resistance, ablation resistance and mechanical properties.

Structure and fracture behavior of ion-beam-modified SiC-Al2O3-ZrO2 ceramic composites

Helium irradiation induced microstructural damages and mechanical response of Al2O3-ZrO2-SiC composites

Evolution of structures and internal stress of ZrC-SiC composite under He ion irradiation and post-annealing

Preparation, microstructure and ion-irradiation damage behavior of Al4SiC4-added SiC ceramics

Structural Evolution in ZrC-SiC Composite Irradiated by 4 MeV Au Ions

Effects of Silicon Ion Irradiation on the Interface Properties of SiCf/SiC Composites

Effects of ion irradiation on microstructures and mechanical properties of SiOC nanocomposites

Microstructure and Mechanical Properties of Hot-Pressed Al2O3–mullite–ZrO2–SiC Composites

Zirconia Reinforced Reaction Bonded Silicon Carbide Composites: Microstructure and Mechanical Properties

Microstructure and mechanical properties of ZrB2–SiC nanocomposite ceramic

Morphology and Chemical Composition of Si-ion-irradiated Zirconolite Glass-Ceramic

Brazing SiC ceramic to Zircaloy-4 using Zr-Ni filler alloy: Microstructure, mechanical properties and irradiation behavior

Preoxidation and Crack-Healing Behavior of ZrB<sub>2</sub>-SiC Ceramic Composite

Nano-Zirconia/Mullite Composite Ceramics Prepared By In-Situ Controlled Crystallization From The Si-Al-Zr-O Amorphous Bulk

Preparation, Microstructure and Deformation Behavior of Zr-based Metallic Glass/porous SiC Interpenetrating Phase Composites

Mechanical Properties and Structure of Zirconia-Mullite Ceramics Prepared by In-Situ Controlled Crystallization of Si-Al-Zr-O Amorphous Bulk

Microstructure Evolution and Solidification Behaviour of ZrB2-SiC Composite Ceramics Fabricated by Laser Surface Zone-Melting

Characterization of microstructure and hardening of SiC ceramic brazed joint using TiZrCuNi filler irradiated by He ions

Irradiation Effects on Amosic-3 Silicon Carbide Composites by Si Ions Implantation

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics