Abstract:Tungsten fiber-reinforced tungsten composite (Wf/W) material is considered a plasma-facing material (PFM) with good application prospects. Commercial tungsten wire (fiber) prepared through forging and drawing processes has excellent mechanical properties, as well as a very high recrystallization temperature due to the unique texture of it grain structure. Commercial tungsten fiber is the most proper reinforcement for Wf/W. The change in the properties of tungsten fiber because of neutron irradiation makes it inevitable for Wf/W to be used as PFMs. However, there is very little research on the change in the properties of tungsten fiber caused by neutron irradiation. In this work, we used heavy ion irradiation to simulate the displacement damage generated by neutron irradiation to explore the alteration of the properties of a commercial tungsten fiber caused by neutron irradiation. The investigated subject was tungsten fiber with a diameter of 300 μm. The irradiation source was 7.5 MeV Au2+, which generated a maximum displacement damage of 60 dpa at a depth of 400 nm, and the irradiation influenced depth was 1000 nm. Because of the irradiation, significant lattice distortion occurred within the tungsten fiber, resulting in the transition from (110) texture to (100) texture at the fiber’s cross-section. The results of the Schmidt factor and Taylor factor analysis indicate a decrease in the plasticity of the tungsten fiber after irradiation, but it did not completely lose its plasticity. The results of the nanoindentation test confirmed the radiation hardening. After irradiation, the hardness of the tungsten fiber increased by approximately 0.33 GPa, but this increase was relatively small compared to other tungsten-based materials. This indicates that commercial tungsten fiber is a low-cost and highly reliable reinforcement material for Wf/W composite materials.

Microstructural Evolution and Mechanical Properties in Cu48Zr48Al4 Bulk Metallic Glass Composites Induced by He+ Ion Irradiation

The Microstructural and Hardness Changes of Tungsten Fiber after Au2+ Irradiation

Ion irradiation effect on mechanical properties and corrosion resistance of a Cu 50 Zr 50 metallic glass

Effect of high-energy Ne ions irradiation on mechanical properties difference between Zr63.5Cu23Al9Fe4.5 metallic glass and crystalline W

Effect of Ion Irradiation on Mechanical Behaviors of Ti40zr25be30cr5 Bulk Metallic Glass

Effects of He ion irradiation on the structural stability and deformation behavior in Zr63.5Cu23Al9Fe4.5 and Fe80B13Si7 metallic glasses

Microstructural evolution in ZrCu metallic glass under neutron irradiation

Surface features of Zr-based and Ti-based metallic glasses by ion irradiation

Mechanism of Local Hardening in Metallic Glass During He Ion Irradiation

Mechanisms for the Free Volume Tuning the Mechanical Properties of Metallic Glass Through Ion Irradiation

Crystallization behavior and mechanical response of metallic glass induced by ion irradiation at elevated temperature

Damage Characteristics of Zr-Based Metallic Glasses under Helium Ions Irradiation

Tuning the strain rate sensitivity and ductility of Zr55Al10Cu30Ni5 metallic glass by He+ ion irradiation

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Strengthening of Zr-based metallic glass at low dose helium ion irradiation

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

Microstructure and mechanical properties of Zr46Cu46Al8 bulk metallic glass after annealing treatment

Effect on microstructure of Fe80B13Si7 metallic glass irradiated by high intensity pulsed ion beam and He ions

Helium irradiation induced microstructural damages and mechanical response of Al2O3-ZrO2-SiC composites

Irradiation-induced homogeneous plasticity in amorphous/amorphous nanolaminates

Evolution of microstructure and mechanical properties of ZrC reinforced FeCrAl alloy after Fe-ions irradiation