Abstract:FeCrAl oxide dispersion strengthened (ODS) steel is regarded as one of the most promising candidate materials for nuclear fission reactors such as supercritical pressurized water reactor (SCPWR), sodium-cooled fast reactor (SFR), and lead bismuth-cooled fast reactor (LFR) and so on, since it has excellent irradiation resistance and good corrosion resistance of super-critical water and Pb–Bi coolants. In the present work, irradiation response of a Zr-added FeCrAl ODS steel (15Cr–4Al-0.1Ti-0.6Zr) together with an Al-free ODS (16Cr-0.1Ti) steel and a non-ODS steel T91 was studied. Electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM) were used to characterize the microstructures including grains, dislocations, and oxides in the pristine specimens and irradiation defects in the irradiated specimens. Nano-indentation tests were used to evaluate the change in hardness after irradiation. The oxides in the 15Cr–4Al-0.1Ti-0.6Zr specimen are slightly larger than those in the 16Cr-0.1Ti specimen, but with a similar number density. After irradiated with 9.45 MeV 83Bi35+ to 26 dpa at ambient temperature, hardening was observed in all the specimens. Irradiation hardening of the 15Cr–4Al-0.1Ti-0.6Zr specimen is slightly higher than the 16Cr-0.1Ti specimen but significantly lower than the non-ODS steel T91. The irradiation defects in the ODS steel specimens are apparently smaller than those in T91 with a similar number density. By calculating sink strength of the initial microstructures such as grains, dislocations and oxides, the evolution of irradiation defects was discussed. A linear relationship between the irradiation hardening and the sink strength was established. A similar linear relationship between the calculated irradiation hardening using the TEM data (based on dispersion barrier hardening model (DBH) and Friedel-Kroupa-Hirsch (FKH) model, respectively) and sink strength was also found. The calculated irradiation hardening is relatively lower than the experimental value, indicating the possible contribution of Cr segregation to hardening which needs further study.

Evolution of microstructure and mechanical properties of ZrC reinforced FeCrAl alloy after Fe-ions irradiation

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

Microstructure and radiation stability of nano-dispersoids in particle-reinforced FeCrAl alloys with different Zr concentrations

Molecular dynamics simulation of tensile deformation behavior of single-crystal Fe–Cr–Al before and after irradiation

84MeV C-ions irradiation effects on Zr–45Ti–5Al–3V alloy

An in-situ TEM investigation of microstructure evolution in Cr-coated zirconium alloy under heavy ion irradiation: Simultaneous evolution of both Cr coating and Zr-4 matrix

Effects of Cr content on ion-irradiation hardening of FeCrAl ODS ferritic steels with 9 wt\% Al

Mechanical property and strengthening mechanism of ZrC nanoparticle dispersion-strengthened Mo containing FeCrAl alloys

The Effect of Black-Dot Defects on FeCrAl Radiation Hardening

A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions

Influence of ions irradiation on the microstructural evolution, mechanical and tribological properties of Zr-4 alloy

Microstructure and Hardening Effect of Pure Tungsten and ZrO2 Strengthened Tungsten under Carbon Ion Irradiation at 700°C

Characterising Ion-Irradiated FeCr: Hardness, Thermal Diffusivity and Lattice Strain

Assessment of microstructure, mechanical and tribological properties of Zr-4 alloy after pre-oxidation and ion irradiation

In-situ TEM study on composition change and amorphous transformation of Laves phase precipitates in FeCrAl alloy during Fe+ irradiation

Structural damage and phase stability of cobalt-free FeCrNi medium-entropy alloy under high-fluence ion irradiation

Effects of Irradiation Temperature and Dose Rate on the Mechanical Properties of Self-Ion Implanted Fe and Fe-Cr Alloys

Structural Damage and Phase Stability of Al0.3CoCrFeNi High Entropy Alloy under High Temperature Ion Irradiation

Effect of Au-ions irradiation on microstructure and mechanical properties of FeCrAl coating

Dislocation loops and hardening induced by Au ion irradiation in FeCrAl alloys with three solute concentrations

In-situ TEM investigation of defect evolution in FeCrAl during post-irradiation annealing