Abstract:A new type of non-oxide sintering additive of YH2 was introduced for the fabrication of AlN ceramics with high thermal conductivity and flexural strength. The effects of YH2 addition (0–5 wt%) on the phase composition, densification, microstructure, thermal conductivity and flexural strength of pressureless sintered AlN ceramics were investigated and compared with those Y2O3-added samples (1–5 wt%). The addition of 1 wt% YH2 led to an in-situ reduction reaction with oxygen impurities, the formation of Y2O3 and finally the formation of yttrium aluminate, which in turn improved densification and microstructure. A high flexural strength (408.69 ± 28.23 MPa) was achieved. The addition of 3 wt% YH2 increased the average grain size and purified the lattice. All these effects are believed to help achieve a high thermal conductivity of 184.82 ± 1.75 W·m−1·K−1. Although the thermal conductivity was close to the value of 3 wt% Y2O3-added sample, its strength was much increased to 381.53 ± 43.41 MPa. Meanwhile, it demonstrated a good combination of the thermal conductivity and flexural strength than the values reported in some literature. However, further increasing the YH2 addition to 5 wt% resulted in a high N/O ratio that inhibited the densification behavior of AlN ceramics. The current study showed that AlN ceramics with excellent thermal and mechanical properties could be obtained by the introduction of a suitable YH2 additive.

Hot-Pressed Sintering Of Aln Ceramics

Vibration Assisted Hot‐Press Sintering of AlN Ceramics

Thermal Conductivity of AlN Ceramics Sintered with CaF2 and YF3

Hot-pressing sintered AlN-BN ceramics with high thermal conductivity and low dielectric loss

Balancing thermal conductivity and strength of hot-pressed AlN ceramics via pre-sintering and annealing process

Transparent AlN ceramics sintered from nanopowders produced by the wet chemical method

Microstructure and thermal conductivity of aluminium nitride with (CaY)F3 as the sintering aid

Effects of AlN Content and Sintering Atmospheres on the Thermal Conductivity of Hot-Pressed SiC Ceramics

Effects of Y2O3 and Yttrium Aluminates As Sintering Additives on the Thermal Conductivity of AlN Ceramic Substrates

Thermal Conductivity of AlN Ceramics with CaF2-YF3 Addition

Effects of YH2 addition on pressureless sintered AlN ceramics

Low-Temperature Sintering of AlN Ceramics by Sm 2 O 3 -Y 2 O 3 -Cao Sintering Additives Formed Via Decomposition of Nitrate Solutions

Thermal conductivity and dielectric property of hot-pressing sintered AlN–BN ceramic composites

Pressureless Sintering and High-Temperature Strength of SiC-AlN Ceramics

Effect Of Aln Content On The Pressureless Sintering Behaviors Of Sic-Aln Multiphase Ceramics

Structure and Properties of Aln Ceramics Prepared with Spark Plasma Sintering of Ultra-Fine Powders

Phase composition, microstructure, electrical and thermal properties of TiN and Yb2O3-Sm2O3 doped AlN ceramics

Effect of Y2O3 on low temperature sintering and thermal conductivity of AlN ceramics

Microstructure and thermal conductivity of AlN ceramics with ultra-fine Y2O3 powder addition

Microstructure and Thermal Conductivity of Spark Plasma Sintering AlN Ceramics

AlN ceramics synthesized by carbothermal reduction of mechanical activated Al2O3