Abstract:This paper presents a novel wafer-level packaging method for shunt, capacitive RF MEMS switches using BCB as the adhesive interlayer. Fabrication and electrical characteristics of the proposed package were initially evaluated for 50 $\Omega $ CPW lines. Microwave measurements of these packaged test structures were fitted to a circuit model, which was later employed to optimize the package for RF MEMS switches. The proposed packaging method was next successfully integrated with an in-house RF MEMS fabrication process. Mechanical and microwave characteristics of these switches were investigated prior to and following the packaging process. Measured shear strength for five packaged switches averages to 18.3 MPa. MEMS bridges deflect by 71 nm on the average due to the packaging step. C-V measurements show 4.2 V average increase in pull-in voltages. Millimeter-wave measurements confirm the negligible effect of package on switch performance. Measured upstate return and insertion losses at 35 GHz read 28 and 0.4 dB, respectively. The downstate isolation attains 35 dB at 35 GHz for most of the packaged switches. Lifetime measurements of a packaged switch demonstrate 10.2 billion cycles without failure. [2018-0268]

Broadband MEMS capacitive switch fabricated using low resistivity silicon wafer

Design and fabrication of X-band capacitive MEMS switches

Design and Fabrication of a Capacitive Series RF MEMS Switch

Design and Fabrication of a Low Insertion Loss Capacitive RF MEMS Switch with Novel Micro-Structures for Actuation

An Ultra-Broadband Contact-Capacitive RF MEMS Switch for 15-110GHZ Applications

A laterally thermally-actuated RF MEMS capacitive switch with parylene as dielectric layer

A Lateral RF MEMS Capacitive Switch Utilizing Parylene As Dielectric

A Low-Supply-voltage High-Power-handling Stacked SPDT Switch Based on Feedforward Capacitors.

Fabrication of a Micromachined Capacitive Switch Using the CMOS-MEMS Technology

Design, optimization and simulation of a low-voltage shunt capacitive RF-MEMS switch

Design and Fabrication of DC to 30 GHz DC-contact Shunt RF MEMS Switch

Design and simulation of a novel RF MEMS shunt capacitive switch with low actuation voltage and high isolation

A Novel 3-resonance Capacitive RF MEMS Switch

Scalable Contact-Capacitive MEMS Switches with High Capacitance Ratio for Millimeter-Wave Applications

Design of A Novel Bulk Micro-Machined Rf Mems Switch

A dielectric-bridge-type MEMS series contact switch for 0-10GHz applications

Capacitive Rf MEMS Switch with Composite Beam

Electro-thermally actuated RF MEMS switch for wireless communication.

Development and Modeling of a Wafer-Level BCB Packaging Method for Capacitive RF MEMS Switches

High-Isolation Contact Switch in Mems Phase Shifter

High-isolation lateral RF MEMS capacitive switch based on HfO2 dielectric for high frequency applications