Abstract:Diffusion bonding of ceramics with a metallic interlayer can give a variety of very complex joint microstructures, which are highly influenced by ceramic compositions, the material and thickness of the interlayer, bonding temperature as well as time at the peak bonding temperature. Experiments with a diffusion bonding of ZrC using a Ti interlayer clearly show that under a certain bonding condition, a seamless joint with the total dissolution of the interlayer can be obtained. They also indicate the existence of the critical interlayer thickness, below which the seamless homogeneous joint domain is obtained, and above which the joint does not homogenize. The key process leading to these outcomes is the diffusion of carbon from ZrC into Ti, which, when the critical carbon concentration is reached, initiates the phase transformation of bcc Ti to TiC, while the binary Zr/Ti diffusion is then driven by entropy and results in a seamless Zr(Ti)C joint. We first show that the dependence of ZrC/Ti interfacial energy on the carbon concentration jump across the interface is the main thermodynamic driving force of the diffusion of carbon from ZrC to the Ti interlayer. Then, we show that the characteristic length (critical thickness of the interlayer) arises as the ratio of this driving force (energy/area) and the bulk energy densities, which oppose the carbon diffusion. Finally, we develop a diffuse interface (phase-field) model to simulate the process. The novelty in the phase-field model is the introduction of a dependence of the interfacial energy on the carbon concentrations on the two sides of the interface. The critical thickness of the interlayer is estimated employing both models and good agreement with experimental findings is obtained. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Cross-diffusion Phenomena Within a ZrCx – Zr – ZrCx Joint

Design of the Multiple Transition Metals Interlayer Process to Diffusion Bond ZrCx Ceramics

Interface Homogenization Control and Microstructural Analysis of ZrC0.85 Joints Diffusion Bonded Using Nb and Ti/Nb/Ti As the Interlayer

Mechanical Property Improvement of Diffusion Bonded ZrCx Joints by Chemical Homogenization Using Ta As the Interlayer

Research on Be/CuCrZr Bonding by Hot Isostatic Pressing at Intermediate Temperature

Microstructures and Mechanical Property of ZrCx Joints Diffusion Bonded Using Ti/Ta/Ti As the Interlayer

Mechanical property improvement of diffusion bonded ZrC x joints by chemical homogenization using Ta as the interlayer

Study on interface behavior of Be/CuCrZr alloy by diffusion bonding

Microstructures and mechanical property of ZrC joints diffusion bonded using Ti/Ta/Ti as the interlayer

Homogenization of the zirconium carbide–titanium interface domain

Interface characterization of Be/CuCrZr joints by hot isostatic pressing bonding

Microstructure and Properties of the Diffusion Bonding Zrb2-Sic/Nb Joint

Formation Mechanism of ZrC-SiC Joint Prepared by Pulsed-Current Assisted Diffusion Bonding

Interfacial reaction evolution of the ZrC ceramic joint diffusion bonded with Ni interlayer

Microstructure evolution of the Zr-4 alloy joints diffusion bonded with pure titanium interlayer and its influence on joint properties

Effect of Zr on the solid sintering process of SiBCN ceramics: Diffusion couple method experiment and DFT calculation

Interface characteristics in ZrB2-based ceramics containing SiC and/or ZrC particles via hot-pressing sintering

Microstructure Evolution and Its Effect on the Mechanical Properties of the ZrC–SiC Composite Joint Diffusion Bonded with Pure Ni Foil

Interfacial Energy As the Driving Force for Diffusion Bonding of Ceramics

Microstructure and mechanical property of Zr-3/CoCrFeMnNi high-entropy alloys joints brazed using a novel Zr Cu alloys

Microstructure and mechanical properties of ZrB2-SiC joints fabricated by a contact-reactive brazing technique with Ti and Ni interlayers