Abstract:Diffusion bonding of ceramics with a metallic interlayer can give a variety of very complex joint microstructures, which are highly influenced by ceramic compositions, the material and thickness of the interlayer, bonding temperature as well as time at the peak bonding temperature. Experiments with a diffusion bonding of ZrC using a Ti interlayer clearly show that under a certain bonding condition, a seamless joint with the total dissolution of the interlayer can be obtained. They also indicate the existence of the critical interlayer thickness, below which the seamless homogeneous joint domain is obtained, and above which the joint does not homogenize. The key process leading to these outcomes is the diffusion of carbon from ZrC into Ti, which, when the critical carbon concentration is reached, initiates the phase transformation of bcc Ti to TiC, while the binary Zr/Ti diffusion is then driven by entropy and results in a seamless Zr(Ti)C joint. We first show that the dependence of ZrC/Ti interfacial energy on the carbon concentration jump across the interface is the main thermodynamic driving force of the diffusion of carbon from ZrC to the Ti interlayer. Then, we show that the characteristic length (critical thickness of the interlayer) arises as the ratio of this driving force (energy/area) and the bulk energy densities, which oppose the carbon diffusion. Finally, we develop a diffuse interface (phase-field) model to simulate the process. The novelty in the phase-field model is the introduction of a dependence of the interfacial energy on the carbon concentrations on the two sides of the interface. The critical thickness of the interlayer is estimated employing both models and good agreement with experimental findings is obtained. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Interfacial Energy As the Driving Force for Diffusion Bonding of Ceramics

Interfacial reaction evolution of the ZrC ceramic joint diffusion bonded with Ni interlayer

Interfacial Microstructure and Joining Properties of TiAl/Ti3AlC2 Diffusion Bonded Joints Using Zr and Ni Foils As Interlayer

Interface Homogenization Control and Microstructural Analysis of ZrC0.85 Joints Diffusion Bonded Using Nb and Ti/Nb/Ti As the Interlayer

Design of the Multiple Transition Metals Interlayer Process to Diffusion Bond ZrCx Ceramics

Microstructures and mechanical property of ZrC joints diffusion bonded using Ti/Ta/Ti as the interlayer

Mechanism of forming interfacial intermetallic compounds at interface for solid state diffusion bonding of dissimilar materials

Diffusion Bonding of TiAl Intermetallic and Ti3AlC2 Ceramic: Interfacial Microstructure and Joining Properties

Cross-diffusion Phenomena Within a ZrCx – Zr – ZrCx Joint

Microstructures and Mechanical Property of ZrCx Joints Diffusion Bonded Using Ti/Ta/Ti As the Interlayer

Evolution and Formation Mechanism of the Interfacial Microstructure on Diffusion Bonded Joints of Single Crystal Ni-based Superalloys to Ti3AlC2 Ceramic with Ni Interlayer

Preparation and interfacial layer microstructure of multilayer heterogeneous composite

Mechanical property improvement of diffusion bonded ZrC x joints by chemical homogenization using Ta as the interlayer

Phenomenon and mechanism of ion diffusion at Co-fired joint interface of NiZn Ferrite/MCT ceramic heterostructure

Electroplating Assisted Diffusion Bonding of ZrC–SiC Composite for Full Ceramic Joints

Understanding the Interfacial Properties in BN-SiO2 Diphase Ceramic/tininb Filler Alloy Systems: First-principles and Mechanical Studies

Interfacial product of ZrB2-SiC brazing joint and growth kinetics of reaction layer

Mechanical Property Improvement of Diffusion Bonded ZrCx Joints by Chemical Homogenization Using Ta As the Interlayer

Microstructure Evolution and Its Effect on the Mechanical Properties of the ZrC–SiC Composite Joint Diffusion Bonded with Pure Ni Foil

Atomic-scale Interfacial Diffusion of Diamond into Titanium: Phase Transition and Layer Dependence

Partial Transient Liquid Phase Diffusion Bonding of ZrC-SiC and 304 Stainless Steel by Ti/Ni Interlayer: Microstructure and Properties