Abstract:The nature of the interface between ceramic particle (CP) and metal matrix is critical to obtain solidification microstructures with optimal mechanical properties of CP-reinforced Al alloys in additive manufacturing. Generally, when the lattice misfit between the CP (e.g., TiB 2 ) and the α-Al matrix is higher than 4%, the interfacial coherency reduces, lowering the effectiveness of CPs. Here, we demonstrate that an L1 2 three-dimensional compound (3DC), which possesses lattice misfit with α-Al lower than 1%, can be introduced in between TiB 2 and α-Al via properly regulating the solidification cooling rate. In the 5TiB 2 /Al-4.5Mg-0.7Sc-0.2Zr (wt.%) as a model system, the lattice coherence of the TiB 2 /α-Al interface is tailored by introducing a 10-30 nm thick Al 3 (Sc,Zr) 3DC interphase when the cooling rate is increased to ~1000 o C/s. But, further increasing the cooling rate to ~6800 o C/s, only Al 3 (Sc,Zr) two-dimensional compound (2DC) with an apparent lattice strain forms at the interface. Taking advantage of the cooling rate (10 2 -10 3 o C/s) provided by laser direct energy deposition (L-DED), the low-misfit "TiB 2 /Al 3 (Sc,Zr) 3DC/α-Al" multi-structural interfaces are acquired, enabling the 3.56TiB 2 /Al-4.36Mg-0.72Sc-0.22Zr alloy as fabricated with L-DED to achieved improved strength-ductility synergy (yield strength 257 MPa, elongation 13.8%) due to the isotropically fine Al grain structure and the homogenous TiB 2 particle dispersion. The outcome of this study provides fundamental knowledge on designing "ceramic/coherent primary interphase/metal matrix" multi-structural interfaces to improve the mechanical properties of engineering metallic materials manufactured by rapid solidification techniques, such as DED additive manufacturing (AM).

Homogenization of the zirconium carbide–titanium interface domain

Interface Homogenization Control and Microstructural Analysis of ZrC0.85 Joints Diffusion Bonded Using Nb and Ti/Nb/Ti As the Interlayer

Cross-diffusion Phenomena Within a ZrCx – Zr – ZrCx Joint

Study on interface behavior of Be/CuCrZr alloy by diffusion bonding

Design of the Multiple Transition Metals Interlayer Process to Diffusion Bond ZrCx Ceramics

Mechanical property improvement of diffusion bonded ZrC x joints by chemical homogenization using Ta as the interlayer

Microstructures and Mechanical Property of ZrCx Joints Diffusion Bonded Using Ti/Ta/Ti As the Interlayer

Microstructures and mechanical property of ZrC joints diffusion bonded using Ti/Ta/Ti as the interlayer

Mechanical Property Improvement of Diffusion Bonded ZrCx Joints by Chemical Homogenization Using Ta As the Interlayer

Rapidly Achieving a Reliable Full-Ceramic Interface of ZrC-SiC Composite Using Ti Interlayer Via Pulsed Electric Current Joining

First-principles Calculations on Interface Stability and Migration of H and He in W-ZrC Interfaces

Novel TiC-based composites with enhanced mechanical properties

Optimizing phase interface of titanium carbide-reinforced copper matrix composites fabricated by electropulsing-assisted flash sintering

Synthesis and Characterization of (zr1/3nb1/3ti1/3)c Metal Carbide Solid-Solution Ceramic

Experimental and first-principles study on TiB/TiC interface in hybrid (TiB+TiC)/Ti6Al4V composite

Interfacial reaction evolution of the ZrC ceramic joint diffusion bonded with Ni interlayer

The influence of Ti-induced precipitates on the microstructure and mechanical properties of (Zr,W)C solid solution

Characterizing the ZrC(111)/c-ZrO2(111) Hetero-Ceramic Interface: First Principles DFT and Atomistic Thermodynamic Modeling

First Principles Study of the Interfaces Between Tungsten and Transition Metal Carbides: Structures, Energetic and Light Elements Trapping

Nanoscale engineering of low-misfit TiB 2 /Al 3 (Sc,Zr)/α-Al multi-interface to improve strength-ductility synergy for direct energy deposited aluminum alloy

Homogenization Treatment-Induced Reduction of Brittle Intermetallic Compounds in Ti2alnb/Ti60 Brazed Joints: Effect on Microstructure and Mechanical Properties