Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Techniques for Improving Breakdown Voltages Using Deep Trench

Fabrication of Ultra Deep Electrical Isolation Trenches with High Aspect Ratio Using DRIE and Dielectric Refill

Deep-Trench Termination of Bipolar RF Power Devices

A Novel High-Voltage Trench Gate Insulated Gate Bipolar Transistor With Diffusion Remnant Layer

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices

Dielectric Layer Field Enhancement for High Voltage SOI Devices

Fabrication of ultra-deep high-aspect-ratio isolation trench without void and its application

Improving Breakdown Voltage Performance of SOI Power Device with Folded Drift Region

Fabrication of keyhole-free ultra-deep high-aspect-ratio isolation trench and its applications

Equivalent Doping Transformation Method for Predicting Breakdown Voltage and Peak Field at Breakdown of Epitaxial-Diffused Punch-Through Junction

A comprehensive analysis of breakdown mechanisms in 4H-SiC MOSFET and JFET

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Trench Termination with SiO2-Encapsulated Dielectric for Near-Ideal Breakdown Voltage in 4H-Sic Devices

Universal Trench Design Method for a High-Voltage SOI Trench LDMOS

Optimizing Technology of Bulk Electronic Field for Lateral High-Voltage Devices

A High Breakdown Voltage Superjunction MOSFET by Utilizing Double Trench Filling Epitaxy Growth

A Higher Breakdown Voltage and Lower Specific on Resistance Superjunction MOSFET with Non-normal Breakdown Voltage Distribution

Investigation Of Fabricating Ultra Deep And High Aspect Ratio Electrical Isolation Trench Without Void

Design Optimization and Reliability Evaluation in 1.2 kV SiC Trench MOSFET with Deep P Structure

Experimental and Theoretical Study of an Improved Breakdown Voltage SOI LDMOS with a Reduced Cell Pitch

Investigation of Breakdown Voltage Degradation in Low-Voltage Narrow Gate Trench MOSFET by Edge Termination Optimization