Abstract:The etching of high aspect ratio structures in silicon via the Bosch process is essential in modern technologies such as microelectromechanical systems (MEMS) and through‑silicon vias (TSV) fabrication. The process can be very demanding on the mask selectivity due to long etching times, and it has been shown that an Al2O3 hard mask is very suitable in this regard, as it offers significantly higher selectivity compared to the conventional SiO2 or resist masks. In this work, we employ a combination of Scanning Electron Microscopy (SEM), Spectroscopic Ellipsometry (SE) and X-Ray Photoelectron Spectroscopy (XPS) depth profiling to scrutinize the Al2O3 mask etching mechanism and therefore the origin of the extraordinary high selectivity. We demonstrate that by increasing the passivation step time, a thicker fluorocarbon polymer layer is formed on the Al2O3, and Al2O3 is then removed with a minuscule average etch rate of ~0.01 nm/min. XPS depth profiling reveals that during Deep Reactive Ion Etching (DRIE) using the Bosch process, an AlFx layer is formed between the polymer and Al2O3. As AlFx is non-volatile, it requires sputtering to be removed. If the polymer layer is thick enough to attenuate the incoming ions such that their energy is not sufficient to lead to desorption of AlFx, such as when using a longer passivation time, the mask is not eroded. By investigating the surface after different amounts of DRIE cycles, we also obtained information about the formation rate of AlFx and the changes in the Al2O3 and polymer thicknesses over the course of a DRIE process. These findings further expand the knowledge of DRIE and can help process engineers to tailor the processes accordingly.

Highly Selective Etch of Silicon Dioxide with Tungsten Hard Mask Deposited by PVD Process

Graphene Masks As Passivation Layers in the Electrochemical Etching of Silicon

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Etch mechanism of an Al2O3 hard mask in the Bosch process

Wafer level bulk titanium ICP etching using SU8 as an etching mask

Synchrotron-radiation-stimulated Etching of SiO2thin Films with a Tungsten Nano-Pillar Mask

Improved PECVD SixNy film as a mask layer for deep wet etching of the silicon

Research on Ar/CHF_3 Reactive Ion Beam Etching of SiO_2

Effects of mask material conductivity on lateral undercut etching in silicon nano-pillar fabrication

Study on Reactive Ion Etching of Vanadium Oxide Thin Film by Taguchi Method

Mechanisms for plasma etching of RRAM SiO2 with diblock copolymer selectivity

Selective atomic layer etching of HfO2 over silicon by precursor and substrate-dependent selective deposition

Molecular dynamics simulation of Si trench etching with SiO2 hard masks

Low-Roughness Plasma Etching of HgCdTe Masked with Patterned Silicon Dioxide

Research on Ar/CHF3 reactive ion beam etching of SO2

Investigation of SiO2 Etch Characteristics by C6F6/Ar/O2 Plasmas Generated Using Inductively Coupled Plasma and Capacitively Coupled Plasma

Dry etching of polydimethylsiloxane used for bio-microfluidic systems

Reactive Ion Etching of Cvd Diamond Films for Mems Applications

Wet Scandium Etching for hard mask formation on a silicon substrate

High Aspect Ratio Etching of Nanopores in PECVD SiC Through AAO Mask

The Study on Mask Technology of Cvd Diamond Thin Films by Rie Etching