Abstract:A digital etching method was proposed to achieve excellent control of etching depth. The digital etching characteristics of p+-Si and Si0.7Ge0.3 using a combination of HNO3 oxidation and buffered oxide etching oxide removal processes were investigated. Experimental results showed that oxidation saturates as time goes on because of low activation energy and its diffusion-limited characteristic. An oxidation model was developed to describe the wet oxidation process with nitric acid. The model was calibrated with experimental data, and the oxidation saturation time, final oxide thickness, and selectivity between Si0.7Ge0.3 and p+-Si were obtained. In Si0.7Ge0.3/p+-Si stacks, the saturated relative etched depth per cycle was 0.5 nm (four monolayers), and variation between experiments was about 4% after saturation. A corrected selectivity calculation formula was also proposed, and the calculated selectivity was 3.7–7.7 for different oxidation times, which was the same as the selectivity obtained from our oxidation model. The proposed model can be used to analyze process variations and repeatability, and it can provide credible guidance for the design of other wet digital etching experiments.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14018?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14018</a>.SEM cross-sectional image and analysis of etched Si/SiGe stacks using the HNO3/HF/CH3COOH mixture; experimental details of HNO3–BOE digital etching; and variation analyses of REPC from the model with different parameter variables (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14018/suppl_file/am0c14018_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Novel Wet Etching of Silicon Nitride in a Single Wafer Spin Processor

Graphene Masks As Passivation Layers in the Electrochemical Etching of Silicon

Selective etching of n-type silicon in pn junction structure in hydrofluoric acid and its application in silicon nanowire fabrication.

A Comprehensive Study of NF3-Based Selective Etching Processes: Application to the Fabrication of Vertically Stacked Horizontal Gate-All-around Si Nanosheet Transistors

Facile detection of biogenic amines in plasma using photonic crystal biosilica combining surface-enhanced Raman spectroscopy and thin layer chromatography

Improvement of the field effect mobility of a-Si:H TFTs using the method of phosphorus doping in active layer

Wafer level microarcing model in 90nm chemical-vapor deposition low-k via etch on 300mm silicon-on-insulator substrate

Selective Undercut of Undoped Optical Membranes for Spin-Active Color Centers in 4H-SiC

Highly Selective Etch of Silicon Dioxide with Tungsten Hard Mask Deposited by PVD Process

A spin-on photosensitive polymeric etch protection mask for anisotropic wet etching of silicon

A Novel Anisotropic Wet Etching Process of (100)-Silicon with Areaefficiency on Convex Corner Compensation Patterns

A Study of Selectively Digital Etching Silicon-Germanium with Nitric and Hydrofluoric Acids

Selective Digital Etching of Silicon–Germanium Using Nitric and Hydrofluoric Acids

Electrochemical etching strategy for shaping monolithic 3D structures from 4H-SiC wafers

Methods to Protect Silicon Microstructures from the Damages in Deep Reactive Ion Etching

High-selectivity pattern transfer processes for self-assembled monolayer electron beam resists

Simultaneous determination of γ-Hydroxybutyrate (GHB) and its analogues (GBL, 1.4-BD, GVL) in whole blood and urine by liquid chromatography coupled to tandem mass spectrometry.

Optimization of Sacrificial Layer Etching in Single-Crystal Silicon Nano-Films Transfer Printing for Heterogeneous Integration Application

A Wet Etching Approach for the Via-Reveal of a Wafer with Through Silicon Vias

Cause of Etch Pits during the High Speed Plasma Etching of Silicon Carbide and an Approach to Reduce their Size

A high-yield fabrication process for silicon neural probes