Abstract:SiNx:H film deposition via plasma-enhanced chemical vapor deposition has been widely used in semiconductor devices. However, the relationship between the chemical bonds and the physical and chemical properties has rarely been studied for films deposited using tools in terms of the actual volume production. In this study, we investigated the effects of the deposition conditions on the H-related chemical bonding, physical and chemical properties, yield, and quality of SiNx:H films used as passivation layers at the 28 nm technology node. The radiofrequency (RF) power, electrode plate spacing, temperature, chamber pressure, and SiH4:NH3 gas flow ratio were selected as the deposition parameters. The results show a clear relationship between the H-related chemical bonds and the examined film properties. The difference in the refractive index (RI) and breakdown field (EB) of the SiNx:H films is mainly attributed to the change in the Si–H:N–H ratio. As the Si–H:N–H ratio increased, the RI and EB showed linear growth and exponential downward trends, respectively. In addition, compared with the Si–H:N–H ratio, the total Si–H and N–H contents had a greater impact on the wet etching rates of the SiNx:H films, but the stress was not entirely dependent on the total Si–H and N–H contents. Notably, excessive electrode plate spacing can lead to a significant undesired increase in the non-uniformity and surface roughness of SiNx:H films. This study provides industry-level processing guidance for the development of advanced silicon nitride film deposition technology.

Improved PECVD SixNy film as a mask layer for deep wet etching of the silicon

PROPERTIES OF PECVD SiNx FILM FOR SOLAR CELLS

Deposition of SiOxNy films as gate insulator via r.f. reactive sputtering

Preparation and Photoluminescence of Nanocrystalline Si-Rich Silicon Oxide Films by Pecvd

N-type polysilicon passivating contacts using ultra-thin PECVD silicon oxynitrides as the interfacial layer

Impact of H-Related Chemical Bonds on Physical Properties of SiNx:H Films Deposited via Plasma-Enhanced Chemical Vapor Deposition

Deposition and Characterization of Ammonia-free PECVD Silicon Nitride

Processing and Characterisation of PECVD Silicon Nitride Films

Study on PECVD process and characteristics of SiCxNy:H film

Remote Plasma Atomic Layer Deposition of SiNx Using Cyclosilazane and H2/N2 Plasma

A spin-on photosensitive polymeric etch protection mask for anisotropic wet etching of silicon

High aspect ratio SiO2/SiN (ON) stacked layer etching using C3HF5, C4H2F6, and C4H4F6

Impact of PECVD SiON stoichiometry and post-annealing on the silicon surface passivation

The Variation of Physical Properties of Plasma‐Deposited Silicon Nitride and Oxynitride with Their Compositions

Improvement of electro-physical properties of ultra-thin PECVD silicon oxynitride layers by high-temperature annealing

High Accuracy Simulation of Silicon Oxynitride Film Grown by Plasma Enhanced Chemical Vapor Deposition

Correlation of film density and wet etch rate in hydrofluoric acid of plasma enhanced atomic layer deposited silicon nitride

Preparation of Sion Film by Plasma Enhanced Chemical Vapor Deposition and Passivation on Si

Low-temperature plasma etching of high aspect-ratio densely packed 15 to sub-10 nm silicon features derived from PS-PDMS block copolymer patterns

Highly Selective Etch of Silicon Dioxide with Tungsten Hard Mask Deposited by PVD Process

High Aspect Ratio Etching of Nanopores in PECVD SiC Through AAO Mask