Abstract:Abstract. Background To keep up with the logic area scaling, back-end-of-line (BEOL) structures are reduced to smaller pitches, requiring faster and reliable metrology and defect detection solution. Aim Metrology and detailed defect inspection at the early phases of process optimization. Approach Single exposure (SE) 0.33NA extreme ultraviolet (EUV) lithography was used along with a bright field mask for patterning in a metal damascene process flow of BEOL structures. We also used a dual damascene process flow for voltage contrast (VC) metrology study. Results Scatterometry technique, together with machine learning (ML), allowed us to have fast and accurate measurements of line-space (LS) and tip-to-tip (T2T) critical dimension (CD), and prediction of electrical performance. We demonstrated characterization results of stochastic defects across various test structures of 28-nm pitch devices. We used a large-area electron beam (e-beam) tool for high-speed large-area inspection which provided us with the quick feedback on defect signatures and scope for further root cause analysis. On a separate dual damascene integration flow, we used VC metrology to capture different failure modes in the patterning process of metal trenches with tight T2T and corresponding overlapping vias. Conclusions We studied the impact of stochastic resist defects on electrical measurements of meander (MR) and fork-fork (FF) structures, and showed that large electrical test structures, built with a relatively simple patterning flow, can be used at the early stages of resist and patterning development, as the electrical failures are almost exclusively caused by the resist defects. In the dual damascene flow, we demonstrated that VC metrology is useful to determine the design rule parameters and capture different failure mechanisms.

Failure analysis for NMOS missing LDD/pocket by nanoprobing and STEM-EDS techniques to advanced nano-devices

Analysis of Electro-Thermal-Stress Failure of the Ldmos Fet under Hpm Pulses

An Electro-Thermal Analysis of Lateral Double-diffused MOSFET(LDMOS) Using FEM

Analysis of 65 Nm Technology Grounded-Gate NMOS for On-Chip ESD Protection Applications

Study of Drain-Extended Nmos under Electrostatic Discharge Stress in 28 Nm and 40 Nm Cmos Process

On the ESD Protection and Non-Fatal ESD Strike on Nano CMOS Devices

Investigation of Esd Protection Strategy in High Voltage Bipolar-Cmos-Dmos Process

Effects of Non-Fatal Electrostatic Discharge on the Threshold Voltage Degradation in Nano CMOS Devices

Failure Mechanism Analysis of Electromigration Dominated Damage in TiSi2 Nanowires

On the Understanding of pMOS NBTI Degradation in Advance Nodes: Characterization, Modeling, and Exploration on the Physical Origin of Defects

Non-destructive Depth-Resolved Characterization of Residual Strain Fields in High Electron Mobility Transistors using Differential Aperture X-ray Microscopy

Investigating metal oxide resists for patterning 28-nm pitch structures using single exposure extreme ultraviolet: defectivity, electrical test, and voltage contrast study

The analysis of the anomalous hot-carrier effect in partially depleted SOI pMOSFETs fabricated on modified wafer

Key Issues and Solutions for Characterizing Hot Carrier Aging of Nanometer Scale Nmosfets

Probing the dopant profile in nanoscale devices by low temperature electrostatic force microscopy

Robust Carbon-Nanotube-based Nano-Electromechanical Devices: Understanding and Eliminating Prevalent Failure Modes Using Alternative Electrode Materials.

Comprehensive study and corresponding improvements on the ESD robustness of different nLDMOS devices

Punch-through and Junction Breakdown Characteristics for Uniaxial Strained Nano-Node Metal-Oxide-semiconductor Field-Effect Transistors on (100) Wafers

Defect-Based Empirical Model for On-State Degradation in Sub-20-nm DRAM Periphery pFETs Under Arbitrary Condition

Study of nano-regime strained MOSFETs with temperature effects

Pull-In/Out Analysis Of Nano/Microelectromechanical Switches With Defective Oxide Layers