Abstract:Observing the gain and loss of PDMS and LiNbO3 surface molecules through an in situ monitoring strategy for oxygen plasma. Saturation of oxygen‐ion and ─OH on the surfaces is achieved, leading to the optimal modification effect. The formation of Si─O─Nb occurred between PDMS and LiNbO3. The PDMS‐ LiNbO3 microfluidic chip exhibited excellent performance, with the highest pressure exceeding 60 psi. Acoustic microfluidic chips, fabricated by combining lithium niobate (LiNbO3) with polydimethylsiloxane (PDMS), practically find applications in biomedicine. However, high‐strength direct bonding of LiNbO3 substrate with PDMS microchannel remains a challenge due to the large mismatching of thermal expansion coefficient at the interface and the lack of bonding theory. This paper elaborately reveals the bonding mechanisms of PDMS and LiNbO3, demonstrating an irreversible bonding method for PDMS‐LiNbO3 heterostructures using oxygen plasma modification. An in‐situ monitoring strategy by using resonant devices is proposed for oxygen plasma, including quartz crystal microbalance (QCM) covered with PDMS and surface acoustic wave (SAW) fabricated by LiNbO3. When oxygen plasma exposure occurs, surfaces are cleaned, oxygen ions are implanted, and hydroxyl groups (‐OH) are formed. Upon interfaces bonding, the interface will form niobium‐oxygen‐silicon covalent bonds to realize an irreversible connection. A champion bonding strength is obtained of 1.1 MPa, and the PDMS‐LiNbO3 acoustic microfluidic chip excels in leakage tests, withstanding pressures exceeding 60 psi, outperforming many previously reported devices. This work addresses the gap in PDMS‐LiNbO3 bonding theory and advances its practical application in the acoustic microfluidic field.

Oxides Formation on Hydrophilic Bonding Interface in Plasma-Assisted Inp/Al2o3/Soi Direct Wafer Bonding

Effect of NH4OH Treatment on Plasma‐Assisted InP/Al2O3/SOI Direct Wafer Bonding

Effect of Combined Hydrophilic Activation on Interface Characteristics of Si/Si Wafer Direct Bonding

Research on Silicon-Glass Thermal Bonding with SiO2 Film Assist

Study of InP/SOI Wafer Bonding Based on Wet Surface Activation Treatment

Formation of Silicon on Plasma Synthesized SiOxNy and Reaction Mechanism

Pre-deposition Growth of Interfacial SiO2 Layer by Low-Oxygen-partial-pressure Oxidation in the Al2O3/4H-SiC MOS Structure

Low Temperature Hydrophilic SiC Wafer Level Direct Bonding for Ultrahigh-Voltage Device Applications

Investigation of Plasma Activated Si-Si Bonded Interface by Infrared Image Based on Combination of Spatial Domain and Morphology

Low Temperature Direct InP/SOI Wafer Bonding Based on Hydrophilic/hydrophobic Treatment

Optical Investigations of Directly Wafer-Bonded InP–GaAs Heterojunctions

Microscale investigation on the wettability and bonding mechanism of oxygen plasma-treated PDMS microfluidic chip

Time‐Dependent Surface Properties and Wafer Bonding of O 2 ‐ Plasma ‐ Treated Silicon (100) Surfaces

Irreversible Bonding of Polydimethylsiloxane‐Lithium Niobate using Oxygen Plasma Modification for Surface Acoustic Wave based Microfluidic Application: Theory and Experiment

Study on interfacial SiO2 layer of silicon direct bonding

Formation of Silicon on Plasma Synthesized Aluminum Nitride Structure by Ion Cutting

Study on the Interfacial SiO/sub 2/ Layer of Silicon Wafer Direct Bonding

Observations of Interfaces in Direct Wafer-Bonded InP–GaAs Structures

Bonding of oxygen at the oxide/nanocrystal interface of oxidized silicon nanocrystals: An ab initio study

Development of a Classical Force Field for the Oxidised Si Surface: Application to Hydrophilic Wafer Bonding

The effects of oxygen plasma and humidity on surface roughness, water contact angle and hardness of silicon, silicon dioxide and glass