Abstract:Observing the gain and loss of PDMS and LiNbO3 surface molecules through an in situ monitoring strategy for oxygen plasma. Saturation of oxygen‐ion and ─OH on the surfaces is achieved, leading to the optimal modification effect. The formation of Si─O─Nb occurred between PDMS and LiNbO3. The PDMS‐ LiNbO3 microfluidic chip exhibited excellent performance, with the highest pressure exceeding 60 psi. Acoustic microfluidic chips, fabricated by combining lithium niobate (LiNbO3) with polydimethylsiloxane (PDMS), practically find applications in biomedicine. However, high‐strength direct bonding of LiNbO3 substrate with PDMS microchannel remains a challenge due to the large mismatching of thermal expansion coefficient at the interface and the lack of bonding theory. This paper elaborately reveals the bonding mechanisms of PDMS and LiNbO3, demonstrating an irreversible bonding method for PDMS‐LiNbO3 heterostructures using oxygen plasma modification. An in‐situ monitoring strategy by using resonant devices is proposed for oxygen plasma, including quartz crystal microbalance (QCM) covered with PDMS and surface acoustic wave (SAW) fabricated by LiNbO3. When oxygen plasma exposure occurs, surfaces are cleaned, oxygen ions are implanted, and hydroxyl groups (‐OH) are formed. Upon interfaces bonding, the interface will form niobium‐oxygen‐silicon covalent bonds to realize an irreversible connection. A champion bonding strength is obtained of 1.1 MPa, and the PDMS‐LiNbO3 acoustic microfluidic chip excels in leakage tests, withstanding pressures exceeding 60 psi, outperforming many previously reported devices. This work addresses the gap in PDMS‐LiNbO3 bonding theory and advances its practical application in the acoustic microfluidic field.

Time‐Dependent Surface Properties and Wafer Bonding of O 2 ‐ Plasma ‐ Treated Silicon (100) Surfaces

Mechanisms for room temperature direct wafer bonding

Microscale investigation on the wettability and bonding mechanism of oxygen plasma-treated PDMS microfluidic chip

Floating Low-Temperature Radio-Frequency Plasma Oxidation of Polycrystalline Silicon-Germanium

Low Temperature Hydrophilic SiC Wafer Level Direct Bonding for Ultrahigh-Voltage Device Applications

Investigation of Plasma Activated Si-Si Bonded Interface by Infrared Image Based on Combination of Spatial Domain and Morphology

A Simple Low-Temperature Glass Bonding Process with Surface Activation by Oxygen Plasma for Micro/Nanofluidic Devices

The effects of oxygen plasma and humidity on surface roughness, water contact angle and hardness of silicon, silicon dioxide and glass

Effect of Combined Hydrophilic Activation on Interface Characteristics of Si/Si Wafer Direct Bonding

Oxides Formation on Hydrophilic Bonding Interface in Plasma-Assisted Inp/Al2o3/Soi Direct Wafer Bonding

Low-Temperature Plasma Treatment of Aluminum for Improved Surface Bonding

Wafer bonding for microsystems technologies

Low‐temperature bonding of glasses: The role of plasma‐engrafted surface amino groups

Mechanisms of Surface Charge Dissipation of Silicone Rubber Enhanced by Dielectric Barrier Discharge Plasma Treatments

Irreversible Bonding of Polydimethylsiloxane‐Lithium Niobate using Oxygen Plasma Modification for Surface Acoustic Wave based Microfluidic Application: Theory and Experiment

Surface Potential Decay and DC Surface Flashover Characteristics of DBD Plasma-Treated Silicone Rubber

Enhancement of the Bond Strength and Reduction of Wafer Edge Voids in Hybrid Bonding

Plasma-enhanced Si-SiC low-temperature bonding based on graphene composite slurry interlayer

A collective die to wafer bonding approach based on surface-activated aluminum-aluminum thermocompression bonding

Two-Step Ar/N 2 Plasma Treatment on SiO 2 Surface for Cu/SiO 2 Hybrid Bonding

Hybrid bonding of GaAs and Si wafers at low temperature by Ar plasma activation