Abstract:As Moore's law is running out of steam, advanced packaging has taken leadership to drive performance. On the one hand, the die area is constantly reduced especially for small package sizes and heterogeneous integration with high interconnect density becomes crucial. This is for example the case in IoT or mobile applications. On the other side, for large packages sizes heterogeneous integration and die segmentation gets an increasing role of processing applications. Here, heterogeneous integration leads to an overall increased yield, mainly as smaller dies generally can be produced with higher yield. In the same time and most importantly, memory, processors, sensors and such from different sources can be combined using heterogeneous integration. Combining segmented dies in an advanced package can be done by two different bonding technologies, namely sequential die bonding or a collective die bonding approach. For the collective bonding, individual dies are populated and tacked either on an interposer or a so-called handling carrier, depending on the bonding technology applied. In case of tacking die face-down on an interposer or other active silicon die, bonding is usually being done by thermal bonding. Here, heating and cooling of the substrates are only done once, considerably reducing process cost and thermal budget of the underlying substrate. The second case is tacking the dies face up on a carrier substrate. This reconstructed dies on a carrier can now be processes again on wafer scale, this means preprocessing steps such as direct bonding can be done before bonding the wafers using fusion or hybrid bonding. In this paper, we will show different integration approaches for collective die bonding for both thermal bonding as well as fusion / hybrid bonding. For both processes, results in terms of die placement and sequential alignment accuracy of the integrated process will be compared and discussed, together with current and potential applications of these processes for future devices.

Wafer bonding for microsystems technologies

Wafer-to-wafer bonding for microstructure formation

Bonding of Aluminum Coated Silicon Wafers Based on Polypropylene Carbonate and As a Multi-Functional Sensor

Mechanisms for room temperature direct wafer bonding

Recent Developments in Low Temperature Wafer Level Metal Bonding for Heterogenous Integration

Progress in wafer bonding technology towards MEMS, high-power electronics, optoelectronics, and optofluidics

A Model of Low‐Temperature Wafer Bonding And Its Applications

Wafer bonding technology and its applications in optoelectronic devices and materials

A collective die to wafer bonding approach based on surface-activated aluminum-aluminum thermocompression bonding

A review of silicon-based wafer bonding processes, an approach to realize the monolithic integration of Si-CMOS and III–V-on-Si wafers

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Wafer bonding using microwave heating of parylene intermediate layers

Adhesion quantification methods for wafer bonding

Low Temperature Al Based Wafer Bonding Using Sn As Intermediate Layer

Wafer Lever Packaging for Gyroscope by Au/Si Eutectic Bonding

Surface Activated Bonding Method Applied in MEMS Pressure Sensor with TSV Structures

Enabling Ultra-Thin Die to Wafer Hybrid Bonding for Future Heterogeneous Integrated Systems

Novel Bonding technologies for wafer-level transparent packaging of MOEMS

Heterogeneous Wafer Bonding Technology and Thin-Film Transfer Technology-Enabling Platform for the Next Generation Applications beyond 5G

Ag-Sn Fluxless Wafer Bonding Technology

Heterogeneous Integration by Collective Die-To-Wafer Bonding