Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

Near-Threshold Sram Design On 40-Nm Cmos Technology For Low Power Design

A near-threshold SRAM design with transient negative bit-line voltage scheme

An Adaptive Negative Bit-Line Voltage Scheme for Improving Write-Ability of SRAM

A 320 Mv, 6 Kb Subthreshold 10T SRAM Employing Voltage Lowering Techniques

Near-threshold non-precharged SRAM

Low-power and robust ternary SRAM cell with improved noise margin in CNTFET technology

High Noise Margin 12T Subthreshold SRAM Cell with Enhanced Read Speed and Eliminated Half-Selected Problem

An Ultra-Low-power 1 Kb Sub-Threshold SRAM in the 180 Nm CMOS Process

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

A Design of Subthreshold SRAM Cell Based on RSCE and RNCE.

Low Voltage SRAM Cell Suitable for Bit-Interleaved Structure

A 12T Subthreshold SRAM Bit-Cell for Medical Device Application

Optimization of SRAM cell by utilizing reverse short channel and reverse narrow channel effect

Novel 15T SRAM Cell for Low Voltage High Reliability Application

A 140-mV Variation-Tolerant Deep Sub-Threshold SRAM in 65-nm CMOS.

A novel low power 64-kb SRAM using bit-lines charge-recycling and non-uniform cell scheme

A 0.33 V 2.5 Μw Cross-Point Data-Aware Write Structure, Read-Half-select Disturb-Free Sub-Threshold SRAM in 130 Nm CMOS

Real-time Bit-Line Leakage Balance Circuit with Four-Input Low-Offset SA Considering Threshold Voltage for SRAM Stability Design

Yield Driven Design and Optimization for Near Threshold Voltage Sram Cells

A 32-Kb High-Speed 8t Sram With Fine-Grained Bitline Stacking For Leakage Reduction In 7nm Technology

Ultra-Low Power Static Logic Circuits Design in Subthreshold Region