Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

Low voltage SRAM design using tunneling regime of CNTFET

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

A carbon nano-tube field effect transistor based stable, low-power 8T static random access memory cell with improved write access time

Low-power and robust ternary SRAM cell with improved noise margin in CNTFET technology

Design and modelling of different SRAM's based on CNTFET 32nm technology

Carbon Nanotube SRAM in 5-Nm Technology Node Design, Optimization, and Performance Evaluation—Part I: CNFET Transistor Optimization

Carbon Nanotube SRAM in 5-Nm Technology Node Design, Optimization, and Performance Evaluation—Part II: CNT Interconnect Optimization

CNTFET-based Data Independent Power Efficient and Robust 8T SRAM Cell

A CNTFET Based Stable, Single-Ended 7T SRAM cell With Improved Write Operation

Robust 6T Si tunneling transistor SRAM design

A Novel Robust and Low-Leakage SRAM Cell with Nine Carbon Nanotube Transistors

Comprehensive Investigation and Design of Tunnel FET-based SRAM

Low-leakage 9-CN-MOSFET SRAM Cell with Enhanced Read and Write Voltage Margins

Reverse Bias Current Eliminated, Read-Separated, and Write-Enhanced Tunnel FET SRAM

A Novel Hybrid Nonvolatile SRAM for Suppressing Leakage Power Using Tunnel FET

Half-Select Disturb-Free 10T Tunnel FET SRAM Cell with Improved Noise Margin and Low Power Consumption

Combinational Access Tunnel FET SRAM for Ultra-Low Power Applications

Analysis of etched drain based Cylindrical agate‐all‐around tunnel field effect transistor based static random access memory cell design

High‐Performance and Radiation‐Hard Carbon Nanotube Complementary Static Random‐Access Memory

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

A Novel TFET-MOSFET Hybrid SRAM for Ultra-Low-Power Applications