Abstract:High static power associated with static random access memory (SRAM) represents a bottleneck in increasing the amount of on-chip memory. Novel, emerging nonvolatile memories such as spintransfer torque magnetic random access memory (STT-RAM), resistive random access memory (RRAM), and ferroelectric field effect transistor-based random access memory (FeFET-RAM) are alternatives for replacing hardware kernels such as SRAM-based last level caches (LLC) due to their fast access times and lower leakage. In this paper, we study an ultra-dense FeFET-RAM based on 1-FeFET memory cells, and address potential disturbance issues at the array level. Disturbances are studied experimentally and via simulation. Experimental measurements are well correlated with modeling results suggesting that we have a good understanding of how disturbance issues will manifest themselves. That said, previous WRITE schemes for 1-FeFET arrays may: 1) exacerbate disturbances and 2) significantly degrade figures of merit (FoM) such as WRITE power. To address these issues, we propose the use of columnwise body connections to simultaneously overcome disturbances and reduce leakage currents during WRITES. We present detailed studies on how 1-FeFET memory cells and arrays (with columnwise body bias) fare when compared to traditional SRAM approaches and other emerging technologies. Notably, we benchmark the 1-FeFET memory against 1T + 1FeFET and 2T + 1FeFET designs proposed in early works, as well as SRAM, STTRAM, and RRAM. Our evaluation of a 64×64 FeFET-RAM array shows that the area, READ delay, and static power are reduced by ~5.3×, ~1.5×, and ~74×, respectively, when compared to an SRAM equivalent. Also, the 1-FeFET memory cell design shows ~50× improvements in terms of WRITE energy with respect to STTRAM and RRAM counterparts.

Comprehensive Investigation and Design of Tunnel FET-based SRAM

Robust 6T Si tunneling transistor SRAM design

A Novel TFET-MOSFET Hybrid SRAM for Ultra-Low-Power Applications

Combinational Access Tunnel FET SRAM for Ultra-Low Power Applications

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

Low voltage SRAM design using tunneling regime of CNTFET

Design and Analysis of Si/GaSb HTFET-Based 7T SRAM Cell for Ultra-Low Voltage Applications

Self-heating Effect on Logic Performance of 6T-SRAM Based on CFET Device

A novel flash memory cell and design optimization for high density and low power application

Design and modelling of different SRAM's based on CNTFET 32nm technology

Analysis of etched drain based Cylindrical agate‐all‐around tunnel field effect transistor based static random access memory cell design

CFET 6T HD SRAM Designs with 3nm Design Rule

Applications of tunneling FET in memory devices

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

A CNTFET Based Stable, Single-Ended 7T SRAM cell With Improved Write Operation

Proposal of a FET-LET Hybrid 6T SRAM

A carbon nano-tube field effect transistor based stable, low-power 8T static random access memory cell with improved write access time

On the SRAM with Comb-Shaped Nano FETs Advancing to 3 Nm Node and Beyond

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy

A FinFET based low-power write enhanced SRAM cell with improved stability

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array