Abstract:The larger volume of capacitor and higher leakage current of transistor have become the inherent disadvantages for the traditional one transistor (1T)-one capacitor (1C) dynamic random access memory (DRAM). Recently, the tunneling FET (TFET) is applied in DRAM cell due to the low off-state current and high switching ratio. The dual-gate TFET (DG-TFET) DRAM cell with the capacitorless structure has the superior performance-higher retention time (RT) and weak temperature dependence. But the performance of TFET DRAM cell is sensitive to programming condition. In this paper, the guideline of programming optimization is discussed in detail by using simulation tool-Silvaco Atlas. Both the writing and reading operations of DG-TFET DRAM depend on the band-to-band tunneling (BTBT). During the writing operation, the holes coming from BTBT governed by Gate2 are stored in potential well under Gate2. A small negative voltage is applied at Gate2 to retain holes for a long time during holding "1". The BTBT governed by Gate1 mainly influences the reading current. Using the optimized programming condition, the DG-TFET DRAM obtains the higher current ratio of reading "1" to reading "0" (107) and RT of more than 2 s. The higher RT reduces the refresh rate and dynamic power consumption of DRAM.

A novel flash memory cell and design optimization for high density and low power application

A Novel High Programming Efficiency and Highly Scalable Flash Memory Cell Based on Tunneling Fet (Tfet)

Low-Voltage and Low-Current Flash Memory Using Source Induced Band-to-Band Tunneling Hot Electron Injection to Perform Programming

High-gate-injection Tunneling Field Effect Transistor for Flash Memory Applications

Computational Associative Memory with Amorphous Metal‐Oxide Channel 3D NAND‐Compatible Floating‐Gate Transistors

A Novel Flash Memory Using Band-to-Band Tunneling In duced Hot Electron Injection to Program

Novel Silicon-Based Flash Cell Structures for Low Power and High Density Memory Applications

Novel SONOS and Floating-Gate Flash Memory Cell Structures for High Density and High Reliability Applications

Novel Vertical Channel Double Gate Structures for High Density and Low Power Flash Memory Applications.

Simulation Of A New Eeprom Flash Memory Cell For High Density Applications

Novel flash memory using band-to-band tunneling induced hot electron injection to program

Low Voltage Flash Memory Cells Using SiGe Quantum Dots for Enhancing F-N Tunneling

A Novel Non-Planar Cell Structure for Flash Memory

A Novel TFET-MOSFET Hybrid SRAM for Ultra-Low-Power Applications

Engineering Improvement of the Core Layers of Charge Trapping Flash Memory Based on Doped HfO2 and Segmented Fabrication

Comprehensive Investigation and Design of Tunnel FET-based SRAM

A Novel Dual-Doping Floating-Gate (ddfg) Flash Memory Featuring Low Power and High Reliability Application

A Novel High-Density Source-Side-Injection Flash Memory Cell with Vertical Channel

A novel flash EEPROM cell based on trench technology for integration within power integrated circuits

A High-Density Memory Design Based on Self-Aligned Tunneling Window for Large-Capacity Memory Application

The Programming Optimization of Capacitorless 1T DRAM Based on the Dual-Gate TFET