Abstract:High static power associated with static random access memory (SRAM) represents a bottleneck in increasing the amount of on-chip memory. Novel, emerging nonvolatile memories such as spintransfer torque magnetic random access memory (STT-RAM), resistive random access memory (RRAM), and ferroelectric field effect transistor-based random access memory (FeFET-RAM) are alternatives for replacing hardware kernels such as SRAM-based last level caches (LLC) due to their fast access times and lower leakage. In this paper, we study an ultra-dense FeFET-RAM based on 1-FeFET memory cells, and address potential disturbance issues at the array level. Disturbances are studied experimentally and via simulation. Experimental measurements are well correlated with modeling results suggesting that we have a good understanding of how disturbance issues will manifest themselves. That said, previous WRITE schemes for 1-FeFET arrays may: 1) exacerbate disturbances and 2) significantly degrade figures of merit (FoM) such as WRITE power. To address these issues, we propose the use of columnwise body connections to simultaneously overcome disturbances and reduce leakage currents during WRITES. We present detailed studies on how 1-FeFET memory cells and arrays (with columnwise body bias) fare when compared to traditional SRAM approaches and other emerging technologies. Notably, we benchmark the 1-FeFET memory against 1T + 1FeFET and 2T + 1FeFET designs proposed in early works, as well as SRAM, STTRAM, and RRAM. Our evaluation of a 64×64 FeFET-RAM array shows that the area, READ delay, and static power are reduced by ~5.3×, ~1.5×, and ~74×, respectively, when compared to an SRAM equivalent. Also, the 1-FeFET memory cell design shows ~50× improvements in terms of WRITE energy with respect to STTRAM and RRAM counterparts.

A Novel TFET-MOSFET Hybrid SRAM for Ultra-Low-Power Applications

Combinational Access Tunnel FET SRAM for Ultra-Low Power Applications

Comprehensive Investigation and Design of Tunnel FET-based SRAM

Robust 6T Si tunneling transistor SRAM design

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

A Novel CMOS FEOL-Embedded Asymmetrical FET for Capacitor-less and Long-Retention DRAM Based on 300mm Logic Foundry Platform

A FinFET based low-power write enhanced SRAM cell with improved stability

Proposal of a FET-LET Hybrid 6T SRAM

Low Power and Temperature-Resilient Compute-In-Memory Based on Subthreshold-FeFET

A Sub-100nA Ultra-low Leakage MCU Embedding Always-on Domain Hybrid Tunnel FET-CMOS on 300mm Foundry Platform

A FinFET-based static memory cell optimized for stability and low power consumption

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

Highly Area-Efficient Low-Power SRAM Cell with 2 Transistors and 2 Resistors

Design and Analysis of Si/GaSb HTFET-Based 7T SRAM Cell for Ultra-Low Voltage Applications

The fabrication of STT-MRAM memory cell with ultra-low switching power

13.2 A 14nm FinFET 128Mb 6T SRAM with VMIN-enhancement techniques for low-power applications

Enabling Normally-off In-Situ Computing with a Magneto-Electric FET-based SRAM Design

A novel flash memory cell and design optimization for high density and low power application

Enabling Normally-Off In Situ Computing With a Magneto-Electric FET-Based SRAM Design