Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

Combinational Access Tunnel FET SRAM for Ultra-Low Power Applications

A Novel TFET-MOSFET Hybrid SRAM for Ultra-Low-Power Applications

A Novel Hybrid Nonvolatile SRAM for Suppressing Leakage Power Using Tunnel FET

Comprehensive Investigation and Design of Tunnel FET-based SRAM

Robust 6T Si tunneling transistor SRAM design

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

Low voltage SRAM design using tunneling regime of CNTFET

Ultra Low Power Circuits Design Based on III-V Group Heterojunction Tunnel Field Effect Transistor

An Ultra-Low Leakage Bitcell Structure with the Feedforward Self-Suppression Scheme for Near-Threshold SRAM.

Proposal of a FET-LET Hybrid 6T SRAM

Low-power and robust ternary SRAM cell with improved noise margin in CNTFET technology

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

Ultra-Low-Power and Performance-Improved Logic Circuit Using Hybrid TFET-MOSFET Standard Cells Topologies and Optimized Digital Front-End Process

Design and Analysis of Si/GaSb HTFET-Based 7T SRAM Cell for Ultra-Low Voltage Applications

A FinFET based low-power write enhanced SRAM cell with improved stability

CNTFET-based Data Independent Power Efficient and Robust 8T SRAM Cell

An Ultra-Low-Voltage Bit-Interleaved Synthesizable 13T SRAM Circuit.

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy

A Low Power 4T2C Nvsram with Dynamic Current Compensation Operation Scheme

Independently-Controlled-Gate FinFET 6T SRAM Cell Design for Leakage Current Reduction and Enhanced Read Access Speed

A Sub-100nA Ultra-low Leakage MCU Embedding Always-on Domain Hybrid Tunnel FET-CMOS on 300mm Foundry Platform