Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

Independently-Controlled-Gate FinFET 6T SRAM Cell Design for Leakage Current Reduction and Enhanced Read Access Speed

A FinFET based low-power write enhanced SRAM cell with improved stability

A CNTFET Based Stable, Single-Ended 7T SRAM cell With Improved Write Operation

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

Hybrid Integration of Gate-All-Around Stacked Si Nanosheet FET and Si/SiGe Super-Lattice FinFET to Optimize 6T-SRAM for N3 Node and Beyond

Low-leakage 9-CN-MOSFET SRAM Cell with Enhanced Read and Write Voltage Margins

CFET 6T HD SRAM Designs with 3nm Design Rule

Robust 6T Si tunneling transistor SRAM design

A 32-Kb High-Speed 8t Sram With Fine-Grained Bitline Stacking For Leakage Reduction In 7nm Technology

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

A Novel TFET-MOSFET Hybrid SRAM for Ultra-Low-Power Applications

A FinFET‐Based Low‐Power Static Random Access Memory Cell With Improved Stability

GAAFET based SRAM Cell to Enhance Stability for Low Power Applications

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy

A FinFET-based static memory cell optimized for stability and low power consumption

Proposal of a FET-LET Hybrid 6T SRAM

An Ultra-Low Leakage Bitcell Structure with the Feedforward Self-Suppression Scheme for Near-Threshold SRAM.

A Low Power 4T2C Nvsram with Dynamic Current Compensation Operation Scheme

Combinational Access Tunnel FET SRAM for Ultra-Low Power Applications

On the SRAM with Comb-Shaped Nano FETs Advancing to 3 Nm Node and Beyond

Analysis of a read disturb-free 9T SRAM cell with bit-interleaving capability.