Abstract:High-density embedded nonvolatile memory (eNVM) at advanced technology nodes is still in great demand for SOC chips used in consumer electronics, self-driving cars, industrial control, and IoT edge devices. Although embedded NOR Flash is still main stream, its process complexity and high integration cost make it difficult to scale beyond 28nm. RRAM has become a promising alternative owing to its excellent scalability, low power, and compatibility with logic processes [1 –6]. However, several challenges still exist that restrict RRAM from practical eNVM applications, as shown in Fig. 24.2.1. 1) a high supply voltage is needed, because of high operation voltages and a considerable voltage drop on write path. 2) The IR drop on write path varies significantly with the distance of a cell from the peripheral circuits. 3) Prior self-write termination (SWT), with its abrupt cutoff, fails to form dense conductive filaments (CFs). While delayed termination helps to alleviate this issue, its delay time is not optimized for fast and slow cells [3]. 4) Previous read reference schemes that use a small number of HRS/LRS cells may collapse when encountering tail bits, resulting in a poor reference [6]. In this work, we demonstrate a 1Mb 14nm-FinFET RRAM with a $0.022 \\mu m^{2}$ cell size. The cell array is in a deep N-well with adequate P-substrate biasing to alleviate the difficulty of high voltage transfer. Placing the bit line (BL) and source line (SL) drivers on the top and bottom of the array reduces the IR-drop variation for near and far cells. Self-adaptive delayed termination (SADT) adjusts the termination time according to cell characteristics (fast or slow), helping to generate robust CFs. A read reference with multiple dummy 1T1R cells avoids the reference collapse issue. The test chip supports reliable read operation at a minimum supply voltage of 0.5V from $-40^{\\circ}C$ to $125^{\\circ}C$.

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy

Design of Nonvolatile SRAM with Ferroelectric FETs for Energy-Efficient Backup and Restore

A New 8T Hybrid Nonvolatile SRAM With Ferroelectric FET

Energy-Efficient Nonvolatile SRAM Design Based on Resistive Switching Multi-Level Cells.

A Low Power 4T2C Nvsram with Dynamic Current Compensation Operation Scheme

4.7 A 65nm ReRAM-enabled nonvolatile processor with 6× reduction in restore time and 4× higher clock frequency using adaptive data retention and self-write-termination nonvolatile logic

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

A Novel TFET-MOSFET Hybrid SRAM for Ultra-Low-Power Applications

An Ultra-Low Leakage Bitcell Structure with the Feedforward Self-Suppression Scheme for Near-Threshold SRAM.

Enabling Normally-Off In Situ Computing With a Magneto-Electric FET-Based SRAM Design

Enabling Normally-off In-Situ Computing with a Magneto-Electric FET-based SRAM Design

A FinFET based low-power write enhanced SRAM cell with improved stability

Charge recycling 8T SRAM design for low voltage robust operation

An energy efficient backup scheme with low inrush current for nonvolatile SRAM in energy harvesting sensor nodes

A 3t/cell Practical Embedded Nonvolatile Memory Supporting Symmetric Read and Write Access Based on Ferroelectric FETs

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

A 14nm-Finfet 1mb Embedded 1t1r Rram With A 0.022 Mu M(2) Cell Size Using Self-Adaptive Delayed Termination And Multi-Cell Reference

24.2 A 14nm-FinFET 1Mb Embedded 1T1R RRAM with a 0.022µm<sup>2</sup> Cell Size Using Self-Adaptive Delayed Termination and Multi-Cell Reference

A 65-Nm ReRAM-Enabled Nonvolatile Processor with Time-Space Domain Adaption and Self-Write-Termination Achieving $> 4\times $ Faster Clock Frequency and $> 6\times $ Higher Restore Speed

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

A FinFET-based static memory cell optimized for stability and low power consumption