Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

Highly Area-Efficient Low-Power SRAM Cell with 2 Transistors and 2 Resistors

Area-Efficient 1T-2D-2MTJ SOT-MRAM Cell for High Read Performance

A Half-Select Disturb-Free 11T SRAM Cell with Built-In Write/Read-Assist Scheme for Ultralow-Voltage Operations

Multifunctional Computing-in-memory SRAM Cells Based on Two-Surface-channel MoS2 Transistors

2D Materials-Based Static Random-Access Memory

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

A Disturb-Free 10T SRAM Cell with High Read Stability and Write Ability for Ultra-Low Voltage Operations

2D Molybdenum Disulfide (mos2) Transistors Driving RRAMs with 1T1R Configuration

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

Novel 15T SRAM Cell for Low Voltage High Reliability Application

Projected performance of Si- and 2D-material-based SRAM circuits ranging from 16 nm to 1 nm technology nodes

A 65-nm Reliable 6T CMOS SRAM Cell with Minimum Size Transistors

A Novel TFET-MOSFET Hybrid SRAM for Ultra-Low-Power Applications

A Low Power 4T2C Nvsram with Dynamic Current Compensation Operation Scheme

An Ultra-Low-Voltage Bit-Interleaved Synthesizable 13T SRAM Circuit.

A Reliable Low Standby Power 10T SRAM Cell With Expanded Static Noise Margins

A 320 Mv, 6 Kb Subthreshold 10T SRAM Employing Voltage Lowering Techniques

A Novel Page-Forming Scheme with Ultra-Low Bit-Error-Rate and High Reliability on a 1mb RRAM Chip

A 28nm 1.5mb Embedded 1T2R RRAM with 14.8 Mb/mm2 Using Sneaking Current Suppression and Compensation Techniques

Highly Compact 1T-1R Architecture (4f(2) Footprint) Involving Fully Cmos Compatible Vertical Gaa Nano-Pillar Transistors and Oxide-Based Rram Cells Exhibiting Excellent Nvm Properties and Ultra-Low Power Operation

3T2M Canted-Type X SOT-MRAM: Field-free, High-Energy-efficiency, and High-Read-margin Memory Toward Cache Applications