Abstract:The design of power‐efficient SRAM cells is necessary for biomedical applications such as body area networks (BANs) to extent their battery life. SRAM cell's power consists of two main components, including leakage power and dynamic power, in which the former overcomes the latter in advanced technology. This paper presents a low‐leakage single‐bitline 9T (L2SB9T) SRAM cell. The proposed design is free from read‐disturbance issue and eliminates writing “1” problem. The results are carried out by utilizing HSPICE and 16‐nm CMOS PTM at a 0.7 V, 25°C, and under severe PVT variations. The proposed L2SB9T SRAM cell is comprehensively compared with other recently published SRAM cells including conventional 6T, write/read enhanced 8T (WRE8T), transmission‐gate 9T (TG9T), read‐disturb‐free 9T (RDF9T), fully differential 10T (Chang10T), data‐independent read port 10T (DIRP10T), and single‐bitline 11T (SB11T). It shows at least 1.26X/1.07X/1.01X improvement in read static noise margin (RSNM)/write static noise margin (WSNM)/write margin (WM). Furthermore, the leakage power is reduced by the proposed cell, at least 1.137X. Moreover, the suggested cell consumes the third/second best dynamic read/write power, which is 1.42X/1.37X lower than that of conventional 6T SRAM cell. The proposed L2SB9T SRAM cell performs its read/write operation reliably by showing at least 1.71X narrower speared in RSNM compared to the best SRAM cell and third best WM variability. For all these improvements, the proposed L2SB9T SRAM cell incurs a 4.20X/1.06X/1.808X penalty in read delay/write delay/layout area when compared with the best SRAM cells, that is, the Chang10T/6T/6T. This paper presents a low‐leakage single‐bitline 9T (L2SB9T) SRAM cell, which is free from the read‐disturbance issue and eliminates the writing “1” problem. Comparison results show at least 1.26X/1.07X/1.01X improvement in read static noise margin (RSNM)/write static noise margin (WSNM)/write margin (WM). Furthermore, the leakage power is reduced at least 1.137X.

Low Voltage SRAM Cell Suitable for Bit-Interleaved Structure

A Half-Select Disturb-Free 11T SRAM Cell with Built-In Write/Read-Assist Scheme for Ultralow-Voltage Operations

A 0.2 V-1.8 V 8T SRAM with Bit-interleaving Capability.

A Disturb-Free 10T SRAM Cell with High Read Stability and Write Ability for Ultra-Low Voltage Operations

An Ultra-Low Leakage Bitcell Structure with the Feedforward Self-Suppression Scheme for Near-Threshold SRAM.

Analysis of a read disturb-free 9T SRAM cell with bit-interleaving capability.

A 320 Mv, 6 Kb Subthreshold 10T SRAM Employing Voltage Lowering Techniques

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

An Ultra-Low-Voltage Bit-Interleaved Synthesizable 13T SRAM Circuit.

A 0.33 V 2.5 Μw Cross-Point Data-Aware Write Structure, Read-Half-select Disturb-Free Sub-Threshold SRAM in 130 Nm CMOS

High Noise Margin 12T Subthreshold SRAM Cell with Enhanced Read Speed and Eliminated Half-Selected Problem

An ultra-low-supply-voltage ultra-low-power subthreshold SRAM bitcell design

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

A low‐leakage single‐bitline 9T SRAM cell with read‐disturbance removal and high writability for low‐power biomedical applications

A 256kb 9T Near-Threshold SRAM With 1k Cells per Bit-Line and Enhanced Write and Read Operations

A 12T Subthreshold SRAM Bit-Cell for Medical Device Application

Near-threshold non-precharged SRAM

A 140-mV Variation-Tolerant Deep Sub-Threshold SRAM in 65-nm CMOS.

A Single Bitline Highly Stable, Low Power With High Speed Half-Select Disturb Free 11T SRAM Cell

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

A novel low power 64-kb SRAM using bit-lines charge-recycling and non-uniform cell scheme