Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

A 140-mV Variation-Tolerant Deep Sub-Threshold SRAM in 65-nm CMOS.

An Ultra-Low-power 1 Kb Sub-Threshold SRAM in the 180 Nm CMOS Process

Low Voltage SRAM Cell Suitable for Bit-Interleaved Structure

A near-threshold SRAM design with transient negative bit-line voltage scheme

A Low-Power Variation-Tolerant 7T SRAM With Enhanced Read Sensing Margin for Voltage Scaling

Ultra8T: A Sub-Threshold 8T SRAM with Leakage Detection

Near-Threshold Sram Design On 40-Nm Cmos Technology For Low Power Design

Low-Power High-Yield Sram Design With Vss Adaptive Boosting And Bl Capacitance Variation Sensing

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

A 512 Kb SRAM in 65nm CMOS with Divided Bitline and Novel Two-Stage Sensing Technique

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

A 256kb 9T Near-Threshold SRAM With 1k Cells per Bit-Line and Enhanced Write and Read Operations

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

A Leakage Current Suppression Technique for Cascade SRAM Array in 55 Nm CMOS Technology

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

9T fast‐write SRAM bit cell with no conflicts for ultra‐low voltage

A Reliable Low Standby Power 10T SRAM Cell With Expanded Static Noise Margins

Novel 15T SRAM Cell for Low Voltage High Reliability Application

Single-Ended Near Threshold 9T SRAM for Portable Low-Power Biomedical Applications

Column-Selection-Enabled 10T SRAM Utilizing Shared Diff-VDD Write and Dropped-VDD Read for Power Reduction