Abstract:This paper explores a low standby power 10T (LP10T) SRAM cell with high read stability and write-ability (RSNM/WSNM/WM). The proposed LP10T SRAM cell uses a strong cross-coupled structure consisting standard inverter with a stacked transistor and Schmitt-trigger inverter with a double-length pull-up transistor. This along with the read path separated from true internal storage nodes eliminates the read-disturbance. Furthermore, it performs its write operation in pseudo differential form through write bitline and control signal with a write-assist technique. To estimate the proposed LP10T SRAM cell’s performance, it is compared with some state-of-the-art SRAM cells using HSPICE in 16-nm CMOS predictive technology model at 0.7 V supply voltage under harsh manufacturing process, voltage, and temperature variations. The proposed SRAM cell offers 4.65X/1.57X/1.46X improvement in RSNM/WSNM/WM and 4.40X/1.69X narrower spread in RSNM/WM compared to the conventional 6T SRAM cell. Furthermore, it shows 1.26X/1.08X/1.01X higher RSNM/WSNM/WM and 1.71X/1.25X tighter/wider spread in RSNM/WM compared to the best studied SRAM cells. The proposed SRAM cell indicates 74.48%/1.41% higher/lower read/write delay compared to the 6T SRAM cell. Moreover, it exhibits the third-(second-) best read (write) dynamic power, consuming 29.69% (26.87%) lower than the 6T SRAM cell. The leakage power is minimized by the proposed design, which is 37.35% and 12.08% lower than that of the 6T and best studied cells, respectively. Nonetheless, the proposed LP10T SRAM cell occupies 1.313X higher area compared to the 6T SRAM cell.

Low-Power High-Yield Sram Design With Vss Adaptive Boosting And Bl Capacitance Variation Sensing

A High-Performance Wordline Voltage-Generating System for Low-Power Low-Voltage Flash Memory

An Ultra-Low Leakage Bitcell Structure with the Feedforward Self-Suppression Scheme for Near-Threshold SRAM.

An Ultra-Dynamic Voltage Scalable (U-DVS) SRAM Design

A low-Power SRAM with charge cycling based read and write assist scheme

Novel 15T SRAM Cell for Low Voltage High Reliability Application

A Reliable Low Standby Power 10T SRAM Cell With Expanded Static Noise Margins

A 140-mV Variation-Tolerant Deep Sub-Threshold SRAM in 65-nm CMOS.

SRAM Standby Leakage Decoupling Analysis for Different Leakage Reduction Techniques

A Low-Power Variation-Tolerant 7T SRAM With Enhanced Read Sensing Margin for Voltage Scaling

A 320 Mv, 6 Kb Subthreshold 10T SRAM Employing Voltage Lowering Techniques

A 0.2 V-1.8 V 8T SRAM with Bit-interleaving Capability.

Optimization of SRAM cell by utilizing reverse short channel and reverse narrow channel effect

A Design of Subthreshold SRAM Cell Based on RSCE and RNCE.

1.03pW/b Ultra-Low Leakage Voltage-Stacked SRAM for Intelligent Edge Processors

A Half-Select Disturb-Free 11T SRAM Cell with Built-In Write/Read-Assist Scheme for Ultralow-Voltage Operations

Near-Threshold Sram Design On 40-Nm Cmos Technology For Low Power Design

Ultra8T: A Sub-Threshold 8T SRAM with Leakage Detection

A 32-Kb High-Speed 8t Sram With Fine-Grained Bitline Stacking For Leakage Reduction In 7nm Technology

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

Radiation-Hardened SRAM for Dynamic Voltage Frequency Systems