Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

A Low-Power Variation-Tolerant 7T SRAM With Enhanced Read Sensing Margin for Voltage Scaling

An 8T-SRAM for Variability Tolerance and Low-Voltage Operation in High-Performance Caches

Ultra8T: A Sub-Threshold 8T SRAM with Leakage Detection

A 256kb 9T Near-Threshold SRAM With 1k Cells per Bit-Line and Enhanced Write and Read Operations

A Reliable Low Standby Power 10T SRAM Cell With Expanded Static Noise Margins

Column-Selection-Enabled 10T SRAM Utilizing Shared Diff-VDD Write and Dropped-VDD Read for Power Reduction

Novel 15T SRAM Cell for Low Voltage High Reliability Application

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

A near-threshold SRAM design with transient negative bit-line voltage scheme

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

An Ultra-Low-power 1 Kb Sub-Threshold SRAM in the 180 Nm CMOS Process

A 140-mV Variation-Tolerant Deep Sub-Threshold SRAM in 65-nm CMOS.

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

A systematic design methodology for yield-driven near-threshold SRAM design

A CNTFET Based Stable, Single-Ended 7T SRAM cell With Improved Write Operation

A low power static noise margin enhanced reliable 8 T SRAM cell

13.2 A 14nm FinFET 128Mb 6T SRAM with VMIN-enhancement techniques for low-power applications

A FinFET based low-power write enhanced SRAM cell with improved stability

A Leakage Current Suppression Technique for Cascade SRAM Array in 55 Nm CMOS Technology

Performance Analysis of 6T and 9T SRAM