Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

A systematic design methodology for yield-driven near-threshold SRAM design

Yield Driven Design and Optimization for Near Threshold Voltage Sram Cells

An 8T-SRAM for Variability Tolerance and Low-Voltage Operation in High-Performance Caches

A near-threshold SRAM design with transient negative bit-line voltage scheme

An Efficient and Robust Yield Optimization Method for High-dimensional SRAM Circuits.

An Efficient SRAM Yield Analysis and Optimization Method with Adaptive Online Surrogate Modeling

Novel 15T SRAM Cell for Low Voltage High Reliability Application

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

A Low-Power Variation-Tolerant 7T SRAM With Enhanced Read Sensing Margin for Voltage Scaling

Performance Analysis of 6T and 9T SRAM

A VDD Correction Method for Static Stability Test of SRAM Bit Cell

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

A 256kb 9T Near-Threshold SRAM With 1k Cells per Bit-Line and Enhanced Write and Read Operations

Comprehensive Investigation and Design of Tunnel FET-based SRAM

An 8kb 40-Nm 2T2MTJ STT-MRAM Design with 2.6ns Access Time and Time-Adjustable Writing Process

Design of RTD-Based TSRAM

Near-Threshold Sram Design On 40-Nm Cmos Technology For Low Power Design

Zero-Hardened SRAM Cells to Improve Soft Error Tolerance in FPGA

Design of Highly Reliable 14T and 16T SRAM Cells Combined with Layout Harden Technique

Low Voltage SRAM Cell Suitable for Bit-Interleaved Structure

A Leakage Current Suppression Technique for Cascade SRAM Array in 55 Nm CMOS Technology