Abstract:High-density embedded nonvolatile memory (eNVM) at advanced technology nodes is still in great demand for SOC chips used in consumer electronics, self-driving cars, industrial control, and IoT edge devices. Although embedded NOR Flash is still main stream, its process complexity and high integration cost make it difficult to scale beyond 28nm. RRAM has become a promising alternative owing to its excellent scalability, low power, and compatibility with logic processes [1 –6]. However, several challenges still exist that restrict RRAM from practical eNVM applications, as shown in Fig. 24.2.1. 1) a high supply voltage is needed, because of high operation voltages and a considerable voltage drop on write path. 2) The IR drop on write path varies significantly with the distance of a cell from the peripheral circuits. 3) Prior self-write termination (SWT), with its abrupt cutoff, fails to form dense conductive filaments (CFs). While delayed termination helps to alleviate this issue, its delay time is not optimized for fast and slow cells [3]. 4) Previous read reference schemes that use a small number of HRS/LRS cells may collapse when encountering tail bits, resulting in a poor reference [6]. In this work, we demonstrate a 1Mb 14nm-FinFET RRAM with a $0.022 \\mu m^{2}$ cell size. The cell array is in a deep N-well with adequate P-substrate biasing to alleviate the difficulty of high voltage transfer. Placing the bit line (BL) and source line (SL) drivers on the top and bottom of the array reduces the IR-drop variation for near and far cells. Self-adaptive delayed termination (SADT) adjusts the termination time according to cell characteristics (fast or slow), helping to generate robust CFs. A read reference with multiple dummy 1T1R cells avoids the reference collapse issue. The test chip supports reliable read operation at a minimum supply voltage of 0.5V from $-40^{\\circ}C$ to $125^{\\circ}C$.

Nanowire Volatile RAM as an Alternative to SRAM

Highly Compact 1T-1R Architecture (4f(2) Footprint) Involving Fully Cmos Compatible Vertical Gaa Nano-Pillar Transistors and Oxide-Based Rram Cells Exhibiting Excellent Nvm Properties and Ultra-Low Power Operation

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy

Enabling architectural innovations using non-volatile memory.

Nanoelectromechanical DRAM for Ultra-Large-scale Integration (ULSI)

Highly compact 1T-1R architecture (4F2footprint) involving fully CMOS compatible vertical GAA nano-pillar transistors and oxide-based RRAM cells exhibiting …

Design and modelling of different SRAM's based on CNTFET 32nm technology

4.7 A 65nm ReRAM-enabled nonvolatile processor with 6× reduction in restore time and 4× higher clock frequency using adaptive data retention and self-write-termination nonvolatile logic

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

Efficient and Robust Nonvolatile Computing-In-Memory Based on Voltage Division in 2T2R RRAM with Input-Dependent Sensing Control

A 65-Nm ReRAM-Enabled Nonvolatile Processor with Time-Space Domain Adaption and Self-Write-Termination Achieving $> 4\times $ Faster Clock Frequency and $> 6\times $ Higher Restore Speed

A 1Mb RRAM Macro With 9.8ns Read Access Time Utilizing Dynamic Reference Voltage for Reliable Sensing Operation

A Comprehensive Study of Nanosheet and Forksheet SRAM for Beyond N5 Node

A carbon nano-tube field effect transistor based stable, low-power 8T static random access memory cell with improved write access time

33.1 A 74 TMACS/W CMOS-RRAM Neurosynaptic Core with Dynamically Reconfigurable Dataflow and In-situ Transposable Weights for Probabilistic Graphical Models.

A 14nm-Finfet 1mb Embedded 1t1r Rram With A 0.022 Mu M(2) Cell Size Using Self-Adaptive Delayed Termination And Multi-Cell Reference

Two-Direction In-Memory Computing Based on 10T SRAM With Horizontal and Vertical Decoupled Read Ports

24.2 A 14nm-FinFET 1Mb Embedded 1T1R RRAM with a 0.022µm<sup>2</sup> Cell Size Using Self-Adaptive Delayed Termination and Multi-Cell Reference

ROBIN: Monolithic-3D SRAM for Enhanced Robustness with In-Memory Computation Support

Performance Analysis of 6T and 9T SRAM

Design Of Almost-Nonvolatile Embedded Dram Using Nanoelectromechanical Relay Devices